Library 3 TERMNL.CAT ATOHAZ.100 [70465,203] 06-Dec-87 1994 A stripped down version of XMDM26.100. This program supports "attack dialing" a Hayes modem at 300/1200/2400 baud. It also supports using a file other than ADRS.DO. It also supports autolog. After autolog you will be in TELCOM's TERM mode. See XMDM26.DOC for info on commands. See ATOHAZ.DOC for specifics on this program. ATOHAZ.DOC [70465,203] 22-Nov-87 3417 Documentation for ATOHAZ.100. Includes in strustions on required changes for use with some modems CBI.BA [76010,371] 23-Jul-86 3890 For business use only. Terminal program to access the CBI System and pull credit files. Accepts input in human form and then formats to the technical requirements of the CBI System. Train employees in 15 minutes or less. CBI.DOC [76010,371] 23-Jul-86 1500 Documentation for CBI.BA CISAUT.DOC [75515,662] 03-Feb-85 3815 Documentation for CISTRN.AUT. See CISTRN.DOC, XMODEM.DOC, XMODEM.UPD, and XMODM3.DOC CISTRN.100 [70205,1144] 24-Aug-83 350 CompuServe protocol "A" for the Model 100. Allows error free uploading and downloading. All features of TELCOM except standard tranfer are available. See CISTRN.DOC CISTRN.ASM [70205,1144] 28-Aug-83 20385 Source code for CISTRN.HEX. NOT NEEDED FOR INSTALLATION. For information only. Assembled with CP/M ASM.COM CISTRN.AUT [75515,662] 03-Feb-85 2875 BASIC interface for modified CISTRN.CO, supports auto-dial/auto-logon with Anchor Signalman Mark XII modem. Additional references, program notes and instructions for modifying CISTRN.CO are in CISAUT.DOC CISTRN.DOC [70205,1144] 24-Aug-83 2395 Documenatation for CISTRN.100, CISTRN.HEX, CISTRN.ASM CISTRN.HEX [70205,1144] 24-Aug-83 4415 see CISTRN.100 and CISTRN.DOC. need HEXLDR.100 to load this. CMS.100 [71545,1042] 27-Jun-84 1340 Simple terminal package for uploading to XEDIT under the CMS/VM operating system. DIAL.101 [73267,757] 05-Sep-86 1075 A compact, easily modified persistant dialer based on XMODEM.312 and DIALER.100 DIAL.BA [70536,1545] 03-Jan-87 1130 Small program that dials a number from the ADRS.do file and then makes an entry in the PHONE.do file of the time of the call and total minutes along with the record from ADRS.DO. See DIAL.DOC DIAL.DOC [70536,1545] 04-Jan-87 1500 Documentation for DIAL.BA DIALER.100 [71256,23] 11-Mar-84 2195 Program we have waited for by Gensch And Cassidy. Detect busy signal allows redialing no answer or busy. When carrier detected put you into Term mode in Telcom. Lots of potential applications. DIRACC.100 [72747,1205] 23-Mar-86 1695 This is the Quebec's famous DIRECT ACCESS 100 program. It was written for one of our club's reunion. It permits the user to enter BASIC or TELCOM WITHOUT losing the phone line ! It is a MUST for all serious TELCOM users. DIRACC.DOC [72747,1205] 23-Mar-86 1825 Documentation for the DIRECT ACCESS 100 (DIRACC.100) DIRACC.INF [71266,125] 31-May-86 1910 This document describes the program DIRACC.PW1, an enhancement of DIRACC.100 here in LIB1. This version provides a user friendly and (more-or-less) bomb proof "shell" for installing DIRACC. This utility provides access to Basic and Text while on-line. DIRACC.PW1 [71266,125] 31-May-86 2235 DIRACC.PW1 is an enhancement of DIRACC.100 here in LIB1. This version provides a user friendly and (more-or-less) bomb proof "shell" for installing DIRACC. It will work cleanly with CDOS. This utility provides access to Basic and Text while on-line. See DIRACC.INF & DIRACC.DOC DIRACC.PW2 [71266,125] 31-May-86 1755 DIRACC.PW2 is a byte-fought version of DIRACC.PW1. It always loads under HIMEM (vs. the optional load address in DIRACC.100 & DIRACC.PW1). This shorter version saves about 500 bytes, which may be significant if you want to keep it in the machine at all times. DIRACC.PW3 [71266,125] 24-Apr-87 2249 DIRACC.PW3 is an enhancement of DIRACC.100 here in DL3. It provides a user-friendly means of installing and removing DIRACC, and will work cleanly with CDOS of the Chipmunk. This version (only!) is configured for use with Tony's MACPGM macro system; contact him on Easyplex for more information. DIRACC.TIP [71266,125] 20-Sep-86 1430 This tip file gives an approach to running DIRACC which tests to make sure it is installed and that the F6 key definition for Basic is what DIRACC expects. DSKTRM.100 [75715,100] 15-Feb-86 3410 DISK-TERM allows use of the Portable Disk Drive while online to a host computer. A Modem IS needed as well as POWER-DISK by Acroatix Inc. NOTE: The External Modem is NOT connected to the Mod-100 except by the Remote Plug of the Cassette Recorder Cable. Read DSKTRM.DOC DSKTRM.DOC [75715,100] 14-Feb-86 3070 Documentation for DSKTRM.100 and hardware requirements with instructions for proper hook up. ENTEL.100 [73327,2461] 20-Jul-86 715 This short utility enhances Telcom's Terminal mode, permitting entry to Basic, easy transfer of ASCII files between RAM and a diskette, and quick return to TERM - without losing the phone line or your place in the CIS file. You can download and upload text of ANY length, regardless of the available RAM. Intended for the DVI, ENTEL.100 should work with any drive or cassette recorder accessible from Basic. Read ENTEL.DOC ENTEL.DOC [73327,2461] 20-Jul-86 7060 Instructions for ENTEL.100 HAYES.DOC [76701,40] 07-Jan-88 10366 Instructions for: QHAYES.100 V2.04, XHAYES.100 V2.05, QTOUCH.100 V2.02, XTOUCH.100 V2.02. X-TEL users MUST read this before trying the program designed for X-TEL! KTEL.100 [75715,1571] 08-Jan-84 500 WARNING! USE AT YOUR OWN RISK! THIS PROGRAM HAS BEEN TESTED AND APPEARS TO NOT AFFECT TELCOM OR ANY OTHER PROCESS, BUT I HAVE BEEN MADE A LIER BEFORE! USES A MACHINE CODE PGM TO GIVE: DATE DAY TIME, FILES, FREE MEMORY. AT THE PUSH OF THE F7 KEY WHILE IN TERM MODE. TO SEE THE RESULT, RUN THE PGM, THEN CALL 62918. PGM WILL WARN YOU WHEN YOU ARE ABOUT TO OVERWRITE IT'S SPACE. LOGON.100 [75665,1045] 30-Mar-84 1910 Will retrieve phone number and auto-logn sequence from ADRS.DO file. If no carrier detected, will redial after 20 second delay. If carrier is detected, will procede through auto-logon sequence and then jump to TELCOM's Term mode. Also, includes special position independent machine code routine for converting strings to uppercase. Instructions in comments at end of program. PCHXMD.DOC [76576,2735] 24-Aug-87 4079 Instructions for PCHXMD.CO -- an adaptation of the SIG's only m/l XMODEM program, XMD100. You'll want this if you're running 1200 or 2400 baud and don't feel like paying for commercial software. PCHXMD.DRV [76576,2735] 25-Aug-87 284 BASIC driver program required for PCHXMD.HEX. See PCHXMD.DOC PCHXMD.HEX [76576,2735] 24-Aug-87 6001 XMD100, plus screen scroll on/off feature. Permits high-speed downloads on M100 in capture mode, in addition to m/l speed XMDM transfers. LOTS faster than XMDM programs in BASIC, if you're using a high-speed modem. Has features of the DIRACC family, too. Requires CHANGE.BA (LIB7) to convert and PCHXMD.DRV in this LIB to run. See PCHXMD.DOC and XMD100.DOC PIXTEL.ASM [70346,1716] 17-Oct-85 11255 The assembly file for PIXTEL. Uploaded for information/modification only. It's not required to use PIXTEL.BA. See PIXTEL.DOC PIXTEL.BA [70346,1716] 17-Oct-85 1530 Now the M100 has a terminal program that displays radar maps, wanted posters, and CB pictures live, on-line. Download this program and run it to add graphics to TELCOM. See PIXTEL.DOC PIXTEL.DOC [70346,1716] 17-Oct-85 3535 Documentation for PIXTEL Q-DAC.100 [76701,40] 22-Jul-87 2062 Version of DIRACC.100 that adds screen scroll on/off. Operation is identical to DIRACC.PW3 except for the addition of F7 to toggle screen scroll on/off. Designed for use with Q-PORT.100 (as patched by Q-PORT.PCH) but can be used with any external modem and normal TELCOM. See DIRACC.DOC and DIRACC.INF Q-PORT.100 [76701,40] 07-Jan-88 5101 Auto-logon, Auto-dial program for the M100/T102 and the WorldPort Modem. Might work with other 100% Hayes compatible modems also. See W-PORT.DOC Q-PORT.PCH [76701,40] 22-Jul-87 497 Patch file for Q-PORT.100 V3.00 to allow use of Q-DAC.100 (DIRACC.100). Merge this file directly into a running version of Q-PORT and then resave updated program. Works exactly the same as Q-PORT.100 except F6 now accesses BASIC, F7 goes to TEXT and F7 toggles screen scroll. QHAYES.100 [76701,40] 07-Jan-88 2906 Auto-dial, auto-redial, auto-logon program for the M100 or T102. Can be used with any modem that is at least partially Hayes compatible. See HAYES.DOC for essential instructions. QTOUCH.100 [76701,40] 07-Jan-88 2730 Auto-logon, auto-dial software for the Touchbase Design TRAVELCOMM 1200 modem. Operates similarly to QHAYES.100, but see HAYES.DOC for details. REDIAL.DOC [75725,1134] 25-Aug-85 10200 Documentation for Redial.JD1 & .JD2. Includes customization hints. NOTE to 5K callers: Although there are useful tips later in the file, the essentials are early. REDIAL.JD1 [75725,1134] 27-Jan-85 1615 Redial.JD1 repeatedly calls a busy phone (presumably a BBS), and hollers when a modem answers. Redial.JD2 is a different, similar program. This version's smaller, but less automatic. Documentation at Redial.DOC REDIAL.JD2 [75725,1134] 27-Jan-85 1990 Redial.JD2 repeatedly calls a busy phone (presumably a BBS), and logs you on when a modem answers. Redial.JD1 is a different, similar program. Documentation at Redial.DOC (You WON'T solve without!) REDIAL.MOD [75725,1134] 12-Apr-84 3135 A short note, intended to start a discussion, on what would be required to modify Redial in order to make it recognize a voice response. SCROLL.DOC [73126,672] 02-Aug-86 1795 Instructions for the use of SCROLL.XTL. X-TEL v2.1 Specific SCROLL.XTL [73126,672] 02-Aug-86 325 Progam to disable scrolling while usinga 1200 baud modem. X-TEL v2.1 specific. See SCROLL.DOC SXM.100 [71676,725] 10-Sep-86 5135 A major revision of XMODEM.312; faster, shorter with many additional features including easier and faster printing, ability to upload messages to any BBS, and bytes free/files while downloading. Compatible with Floppy.CO and optimized for DVI use. Optional patch calls you upon successful redial of busy number. This version (3.2) downloads faster. Use a special version, SXM.CHP, to upload from or download to a Chipmunk. SXM.CHP [73126,672] 08-Sep-86 5305 A minor revision of SXM.100 to allow no-protocol downloads and uploads with the Chipmunk. All functions remain the same. See SXM.100 and SXM.DOC. Includes change to speed up XMODEM downloads. SXM.DOC [71676,725] 11-Sep-86 9585 This is the users guide and complete documentation for SXM.100, a faster and shorter telecommunications program with xmodem capability. SXMACC.DOC [73126,1775] 21-Feb-87 8484 Documentation for SXMACC.RLC SXMACC.RLC [73126,1775] 21-Feb-87 241 A small 100 byte M/L program for use with SXM.100 on this SIG. Allows access to TELCOM and then lets you return to SXM. Can be used with DIRACC to provide access to TEXT from SXM as well. Can be adapted to any BASIC program. Needs RLCLDR.100 to load. See SXMACC.DOC and SXMMRG.ACC SXMMRG.ACC [73126,1775] 21-Feb-87 713 A small patch for SXM.100 or Chipmunk version to allow return to SXM from TELCOM using SXMACC.RLC. See SXMACC.DOC TEL101.ASM [71266,125] 27-Nov-87 11713 source code for TEL101.CO TEL101.INF [71266,125] 27-Nov-87 2124 brief instructions for use of TEL100.CO (built by TEL100.LDR) TEL101.LDR [71266,125] 27-Nov-87 5351 TEL101.LDR is a Basic program for the 100/102 (only!) which creates the M/L terminal program TEL101.CO. Just run it form the menu and wait. TEL101.CO works just like TELCOM in ROM, but adds SplitScreen, DIRACC and macros. Works with internal or external modem. See TEL101.INF for instructions and credits. This is a smaller alternative to XMDPW5, with all features except xmodem transfers. TELCOM.100 [75665,1405] 04-Jan-84 1190 I added a lot of REM's to this program that Don Corbitt submitted in a Message. Once the program is run, the F6 and F7 function keys in TERM mode in TELCOM are altered so that: F6 display Free Space left (RAM); F7 display directory (FILES) TELHZ1.100 [71266,125] 27-Nov-87 2606 TELHZ1.100 is a Basic program which provides autodial and logon, and modem speed control, for TEL101.CO when used with a Hayes or compatible modem. Note customization notes in the first few lines, depending on how you use TEL101.CO (from menu or permanently loaded). Read HAYES.DOC TELKEY.100 [75655,1516] 06-Jan-84 530 This two line BASIC program defines the F6 and F7 keys to have the following function. F6 prints free memory, F7 lists all file names (like BASIC FILES). Doesn't affect HIMEM. TELUTL.100 [73267,552] 07-Feb-87 2117 A TELCOM utility created to permit data and file use while on-line without interruption comm-link. Combines some of the most useful programs from this Forum. TELUTL.100 [75655,1056] 25-Oct-85 870 This program programs and in M100 TELCOM mode with either TELKEY or SCROLL (fast LCD) features. If `*' is next to TELKEY on the main menu, pressing in TERM mode gives you `Bytes Free' and gives you `Files' while on-line. If `*' is next to SCROLL on the main menu, turns SCROLL ON in TERM mode (limiting M100 speed to 600 bps) and turns SCROLL OFF for 1200 or 2400 bps operation. TELUTL.DOC [73267,552] 09-Feb-87 3394 Documents TELUTL.100 which is a TELCOM utility created to permit data and file use while on-line without interupting comm-link. Combines some of the most useful programs from this SIG. TERM.100 [75665,1045] 22-May-84 2350 Terminal emulation and ASCII Xon/Xoff protocol to upload & download text files at 300 or 1200 baud. Does not auto-dial and does not wrap on upload. Buffered file I/O technique enables cassette file transfers. TERM.MR1 [76703,650] 09-Feb-85 2910 Preliminary program to work directly with the Chipmunk from a terminal status in the M100. Adapation of TERM.100 written by Rick Perry. May have some bugs since only tested the download capability and autolog. TERMCP.100 [72737,120] 12-Oct-85 420 update to my earlier termcap file. It includes several functions, arrow and function keys (use ESC , etc), and works with vi, etc. TLCALL.HDC [75765,711] 29-Aug-83 2220 A TELECOMMUNICATION PROGRAM FOR THE TRS-80 MODEL 100 THAT ALLOWS REMOVAL OF UNWANTED CHARACTERS (SUCH AS RUBOUTS) FROM THE INCOMING STREAM TOGGLE.100 [72227,1661] 29-May-90 866 Toggle scroll on/off with TELCOM's F6 TRMCAP.100 [70465,203] 07-Sep-87 1087 A pair of termcap entries. One for the "stock" model 100, and another for a 100 with a DVI. Unix users rejoice! now you can use the DVI with your 100 TRMCAP.DOC [72737,120] 06-Oct-85 145 This is a UNIX termcap, (TERMinal CAPability) file. It describes to a Unix system the codes and screen functions used by a mod100 so that the system can recognize and use your mod100 as a terminal. It has been tested on SPERRY/NCR systems and Fortune equipment. TRMDOC.MR1 [76703,650] 25-Dec-84 1470 Documentation for TERM.MR1 U1100.100 [70116,1706] 22-Sep-83 3125 TELCOM LIKE TERMINAL PROGRAM FOR RS MODEL 100 WRITTEN IN BASIC UNIXV.100 [73076,3320] 15-Nov-86 505 A terminfo description to use the Model 100 as a UNIX V terminal. See UNIXV.DOC UNIXV.DOC [73076,3320] 15-Nov-86 2955 Documentation for UNIXV.100 VT100.100 [75745,1575] 08-Feb-85 3835 Emulates a 24x80 screen using Dec VT100 line protocol. See VT100.DOC VT100.ANS [75745,1575] 11-Feb-85 1135 This is a patch to VT100.100 for ANSI Dec VT100 protocol. Merge this file into VT100.100. See VT100.DOC VT100.DOC [75745,1575] 08-Feb-85 3415 Documentation for VT100.100 VT100.DVI [75745,1575] 08-Sep-85 1810 This is an addendum to VT100.100 to support use of the Tandy DVI. A manual dial option has been added. This file must be MERGEd with the VT100.100 program. (WARNING: These lines of code are untested!) VT52.DOC [70465,203] 04-Jul-87 2794 This file gives a list of VT52 control characters, escape sequences and other info. It list them along with M100 (with DVI) equivalents. VTEMUL.DO1 [73126,1775] 20-Jun-87 10450 First half of the documentation for VTEMUL.RLC. VTEMUL.DO2 [73126,1775] 20-Jun-87 11217 Second half of the documentation for VTEMUL.RLC. VTEMUL.RLC [73126,1775] 20-Jun-87 7413 A M/L program to emulate a VT100 terminal. It decodes screen commands, has complete VT editing, emulates the VT keypad, recognizes tabs and even simulates the line drawing character set. It scrolls sideways to show the full 80 column screen. Compatible with TELCOM. Uses internal modem or RS232 port. You need RLCLDR.BA in LIB7 to locate this file anywhere in memory as a 3370 byte M/L program. W-PORT.DOC [76701,40] 07-Jan-88 11949 Documentation for Q-PORT.100 and X-PORT.100 X-BP.PCH [76701,40] 25-Jul-88 383 Patch to X-PORT.100 for use with the Traveling Software Booster Pack. Makes changes that are necessary to run the BP version of X-Tel. Load X-PORT into BASIC and at the OK prompt, type MERGE"X-BP then save the changed file to the BP. This change is compatible with the internal version of the WorldPort modem. X-PORT.100 [76701,40] 07-Jan-88 5789 Auto-dial, auto-redial, auto-logon program for the M100 and T102. Especially tailored to run with X-TEL V2.1 and V2.2. Can be used with any 100% Hayes compatible modem, but designed for the WorldPort. See Q-PORT.100 for standard version of this program. See W-PORT.DOC for very important instructions and warnings. XH-BP.100 [76701,40] 04-Oct-87 3512 XH-BP.100 is a version of XHAYES which has been modified to work with X-TEL in BOOSTER PAK. Looks for all BA, CO and DO files in the RAMDISK (R:). Tested with an early version of BoosterPAK. Let me know if it works with yours. See HAYES.DOC XHAYES.100 [76701,40] 07-Jan-88 3519 Auto-dial, auto-redial, auto-logon program for the M100 and T102. Especially tailored to run with X-TEL V2.1 and V2.2. Can be used with any external modem that is at least partially Hayes compatible. See QHAYES.100 for standard version of this program. See HAYES.DOC for very important instructions and warnings. XMD105.DOC [71716,1642] 14-Nov-85 1465 List of suggestions for use and improvements of the Xmodem machine language program for the model 100. XMD105.SRC [71716,1642] 13-Nov-85 39560 Source code for updated machine language Xmodem Telcom program. this is XMD100 source with a few corrections. Please note those who modify it are asked to: 1) make your version different in a noticable way:version #, prompts, etc. 2) continue to share (especially with me) including source 3) make some of the suggested improvements (from here and elsewhere) XMD51A.ASM [71266,125] 14-Oct-88 7834 XMD51A.ASM & XMD51B.ASM are the two parts of the ADSM source for XMDPW5.CO/100 (upload of 10/14/88) XMD51B.ASM [71266,125] 14-Oct-88 12170 XMD51A.ASM & XMD51B.ASM are the two parts of the ADSM source for XMDPW5.CO/100 (upload of 10/14/88). XMD61A.ASM [71266,125] 07-Sep-88 7862 the first part of the linked ADSM source for XMDPW6.CO for the Model 100, of 7/10/88. This is the same source as XMDPW6.ASM, but configured for linking. XMD61B.ASM [71266,125] 07-Sep-88 15442 the second part of the linked ADSM source for XMDPW6.CO for the Model 100, of 7/10/88 XMDHZ5.100 [71266,125] 14-Oct-88 2578 Version of XMDHZ5.100 for the 10/14/88 version of XMDPW5.CO. Autodial/redial for XMDPW5.CO/100 and Hayes-compatible modems. Note the customization comments in first lines of program and modify as needed. XMDHZ6.100 [71266,125] 15-Jul-88 2577 A BAsic autodialer/redialer for use with XMDPW6.CO and a Hayes compatible modem. See line 1-3 for customization notes. Run only with XMDPW6.CO present on menu or loaded in its running location and ADRS.DO on menu. DO NOT use with earlier versions of XMDPWn.CO, or disaster may befall you. XMDM26.100 [70465,203] 05-Jul-87 6395 Improved XMODEM program for the Model 100/102, based on Rick Perry's XMODEM.312. Supports manual and attack-dialing with either the internal modem or an external Hayes-type modem. 300/1200/2400 baud. You must download XMDM26.DOC and run the included program to make a working copy of this program! XMDM26.DOC [70465,203] 26-May-87(03-Nov-88) 12750 Documentation for XMDM26.100 XMDM26.XR0 [70465,203] 26-May-87 4186 Variable & line # cross-reference for XMDM.26. Includes descriptions of the purpose of many variables and subroutines. XMDM26.XR1 [70465,203] 26-May-87 13765 Structured printout (pretty-printed) of XMDM26. *HEAVILY* commented. XMDPW5.100 [71266,125] 14-Oct-88 10326 Relocating Basic loader that creates an Xmodem comm program. Includes DIRACC (SHIFT-F6 to BASIC, SHIFT-F7 to TEXT) and splitscreen in Conference (use /NOECHO command and SHIFT-F1 to toggle, with label line ON to start). Now includes integral macro capability. See XMDPW5.DOC XMDPW5.ASM [71266,125] 29-Nov-87 20112 Source of XMDPW5.CO (from XMDPW5.100) XMDPW5.DOC [71266,125] 16-Jul-88 11514 Documentation for XMDPW5.100 & XMDPW5.200 XMDPW5.DVI [71266,125] 23-Nov-87 351 XMDPW5.DVI disables the splitscreen capability of XMDPW5, but retains all other features. Requested by a DVI user, presumably due to incompatibility of Splitscreen with DVI software. Must have XMDPW5.CO on menu, and HIMEM = TOP (lowest!) address of XMDPW5.CO to use. XMDPW5.HEX [71266,125] 15-Oct-88 8222 HEX version of the 10/14/88 version of XMDPW5.CO/100. Load with HXFER.100; will run to top of User RAM (58918 to 62959). Use Basic loader (XMDPW5.100) for relocatable CO program XMDPW5.TSM [71266,125] 17-Jan-88 21248 This is a version of XMDPW5.ASM which has been modified for use with the MS-DOS cross assembler TASM.EXE (see TASM.USE & TASM85.TAB in LIB8 of this Forum). TASM.EXE can be obtained by downloading TASM.ARC in LIB4 of the IBMSW forum. Note that this version of XMDPW5 is functionally identical to the version of 11/29/87 -- nothing new, other than the ability to use the TASM cross assembler. XMDPW6.100 [71266,125] 15-Jul-88 11318 A relocating BA loader to create a XMDPW6.CO (will relocate below DVI OS or CDOS). Works just like XMDPW5 (see XMDPW5.DOC, Lib 3), but Xmodem supports 0: (DVI and Chipmunk, not TDD), R:, CAS:. Revised to prompt for RAM file overwrite and to include integral on-line checksum (SHIFT-F2). Define Basic key 6 as: Key 6, "Term"+chr$(24)+callxxxxx"+chr$(13) where xxxxx = TOP+27 XMDPW6.ASM [71266,125] 15-Jul-88 23288 ADSM source for the Model 100/102 XMDPW6.100 XMDPW6.INF [71266,125] 18-Jul-88 7021 XMDPW6.CO is a full-featured machine language communications program which provides xmodem upload from and download to external devices, inclouding the DVI, Chipmunk, Gold Card and the Booster Pak. XMDPW6.CO is essentially identical to XMDPW5.CO --except it supports upload and download of files from/ to external devices (CAS:, 0:, R:, etc.). Model 100/102 update of 7/15/88 includes prompt for overwrite of RAM files and integral checksum code. XMODEM.312 [75665,1045] 23-Jan-85 6605 A major revision of XMODEM.100 with added features: [F1]=PREVious screen display, optional Xon/Xoff buffered file transfer, and more. See XMODEM.DOC XMODEM.DOC [75665,1045] 14-Oct-85 12940 User's guide and some program documentation for XMODEM.312. The changes and new features appearing in the XMODEM.312 program are described, and some file transfer time comparisons reported. Program notes include ROM calls, POKEs, and machine language subroutines with their assembly source coding. XMODEM.HLP [76703,446] 29-Nov-86 2655 Instructions and reasons for use of XMODEM protocol for UPLoading and DOWnloading files to databases on CompuServe. XMODM3.DOC [75515,662] 27-Jan-85 3585 Documentation for XMODM3.MLL, revision of Rick Perry's XMODEM.312. Program supports Anchor Signalman Mark XII modem and Chipmunk disk drive, CDOS version 2.4.5. Documentation assumes you have read XMODEM.DOC and XMODEM.UPD in this library. XMODM3.MLL [75515,662] 27-Jan-85 6855 Rick Perry's XMODEM.312 modified for use with Anchor Signalman Mark XII modem and Chipmunk disk drive. See XMODM3.DOC, XMODEM.DOC and XMODEM.UPD in this database for instructions and cautions. XMODSK.100 [71246,313] 13-Oct-86 6500 'xmodsk' allows the use of rs232 (com:) during logon using the built in modem of the Model 100. It needs a tiny little change in the hardware of the Model 100. Reading xmodsk.doc is essential for using of xmodsk.100. This rev. fixes some bugs which occured after extensive testing of my first rev. XMODSK.DOC [71246,313] 13-Oct-86 4045 Documentation for XMODSK.100 XTOUCH.100 [76701,40] 07-Jan-88 3363 Auto-logon, auto-dial software for the Touchbase Design TRAVELCOMM modem to run with X-TEL V2.1 or V2.2 Similar to XHAYES.100, but see HAYES.DOC for details and very important warnings. See QTOUCH.100 for non-X-TEL version.