TRANSFER.TXT  Copyright 1991 Louis Self CIS [74076,1273]
 
       I put the following toggether for my 77 year old mother to use with her Tandy 102.  If she can do it with these instructions, anyone can.
 
                TRANSFERING FILES BETWEEN THE T-100/102/200 *
 
 
HARDWARE:
   RS-232C D-25 ports (located on the back of the computers)
   Null Modem (Radio Shack part #26-1496, $4.95
   RS-232C cable (connect the computers through the null modem)
 
TRANSFERING A DOCUMENT:
  RECEIVING COMPUTER (do first):
    Enter the file to be received (probably an empty file at this point)
    [F2] COM:97E1E<ENTER> 
  SENDING COMPUTER (do second):
    Enter the file to be sent
    [F3] COM:97E1E<ENTER>
 
CHANGING A BASIC PROGRAM IN RAM TO A DOCUMENT SO YOU CAN TRANSFER AS ABOVE:
  SENDING COMPUTER:
    Enter BASIC
    LOAD"program"<ENTER>
    SAVE"program.DO"<ENTER>
    [F8] (to exit BASIC)
    Now transfer the document to the other computer as above
  RECEIVING COMPUTER AFTER THE DOCUMENT IS RECEIVED:
    Make sure the received document is in RAM and unchanged
    Enter BASIC
    LOAD"program.DO"<ENTER>
    SAVE"program"<ENTER>  (program.BA now appears in your main menu)

*  For the T-200 substitute 97E1ENI for 97E1E.
 
  To transfer files to/from other
computers, simply match the communications parameters to:
    19200 BAUD (use 37E1E for 300 BAUD)
    7-bit word
    Even parity
    One stop bit
    Enable handshake
     See your TELCOM manual to change the parameters if necessary.  Have fun!!