SWL Log Data Base For the Radio Shack Model 100 and PCSG's Super ROM by David Coons 72507,3172 27-Jan-1988 ---------- If you happen to have a Model 100 and PCSG's Super ROM (I have version 1.8, but any version with the data base feature should work), you have all you need to start and maintain a data base of your SWL loggings. To do this, follow these steps: 1) Use TEXT to cut-and-paste the seven lines at the bottom of this document (between the lines of ='s) into a file called SWLOG.DO. 2) Call up Super ROM, go into the Lucid spreadsheet module and create a new spreadsheet called SWLOG (yes, the same name -- Super ROM assigns different extensions so the two files won't conflict) 3) Once you have a blank spreadsheet on the screen, press F6 (Data), F1 (View), and enter SWLOG and press Enter. You are now ready to begin entering your loggings. If you want to print your loggings, you may want to go into the spreadsheet and adjust some column widths, or use Super ROM's data base report feature. Column usage is as noted in the data entry screen below (e.g., column A contains the date, column D the frequency, etc.). You can also sort your loggings by frequency, date, signal strength, etc. The fields and what they mean: DATE -- entered in YYMMDD format for correct sorting TIME -- two fields for beginning and ending times; UTC, of course FREQ -- kHz; enter a leading zero if frequency is less than 10000 (e.g., 05630.0) for sorting purposes SIGNAL STRENGTH -- 0 to 10 or whatever your receiver is set up for; you have up to four digits QSL SENT -- date (YYMMDD) QSL REC'D -- date (YYMMDD) COUNTRY -- Be consistent when you enter these so sorting will be accurate STATION ID -- same comment as for COUNTRY NOTE (2 lines) -- for anything you want to put here If you haven't heard of the Super ROM, it is a ROM chip produced by the Personal Computer Support Group (11035 Harry Hines Blvd #207, Dallas TX 75229, 214/351-0564) which plugs into the back of your Model 100 (or 102) and gives you four programs: text processor, spreadsheet, data base, and outliner. If you need these four functions, it's invaluable. The cost is approximately $199. SWLOG.DO follows (leave out the lines of ='s): ========== DATE [a# ] FREQ [d# ] #[#] TIME [b#]-[c#] SIG [e#] COUNTRY ....... [h# ] STATION ....... [i# ] QSL .......... SENT [f# ] REC'D [g# ] NOTES [j# ] [k# ] ==========