(c)1990 Golden Triangle, Inc. (c)1990 Wilson Van Alst All rights reserved. Fm: Dennis Lowrey To: all Help.... I bought a WP-2 for my spouse to use as an field input device. I have the appropriate cables to hook the WP-2 to my PC (see previous message) and I have a null modem (if I need it in the RS-232 line). BUT I'm puzzled about how to move a file from the WP-2 to my PC. I have PC-Works 2.0 which various modem protocols and PC Tools 5.5 which also has several configurations. I obviously have a modem for my PC but not for the WP-2. Can I move files from the WP-2 to the PC with a null modem? Have anybody done it with the software packages I mentioned. Can you upload files from the WP-2 to the PC on just a RC-232 line? Any suggestions? I'm very experienced with software issues but a novice at commo problems. - 0 - Fm: Denny Thomas To: Dennis Lowrey I just tried downloading to the WP-2 with PC Tools 5.5 and it worked fine. You just have to have your parameters matched up between the two machines to get things to work. If you haven't made up a calling card in PCT, make one using: Terminal = TTY Parity = None Duplex = Half Data Bits = 8 Stop Bits = 1 Baud = 1200 Flow Control = Xon/off The parameters I left out shouldn't matter. On the WP-2 end, see page 120 of the manual. Change the #4 parameter to 1200 baud, otherwise make sure that the rest of the parameters match what's shown in the list. When you bring up the Telecommunications section of Desktop, select "Manual" under the Actions menu while the previously set up calling card is highlighted. That will get you into a into the telcom screen. On the WP-2 side, go into TELCOM (F2-9). "RS232 is ready" should appear in the upper left corner. If a telephone number appears, you have to go back and clear out that phone number in the TELCOM setup menu. At this point you should be ready to do your uploads/downloads. Select "Receive" in PCT to upload and follow the prompts. Select F1-U on the WP-2 to upload to PCT. After giving the filename, the WP-2 should start printing dots on the screen. If it doesn't, something else is not quite setup correctly so come back here and we'll see what we can do to help. - 0 - Starting message #: 190448 Starting date: 21-Nov-89 19:17:32 Participants: Dennis Lowrey 71011,107 Denny Thomas 76701,40