Lib-03-Telcom Files


Up One Folder

Filename File Size Date Created Last Modified  
03_idx.txt 151455 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
100MAC.TXT 1616 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Method of connection between the Model 100 and the Macintosh, avoiding the cable problems or inoperability of other methods.  
19200.TXT 14239 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This file is both a description of the FLTRAN.BIN file, and a discussion of high speed file transfers using the Model 100 and another "HOST" computer. The information is specific to FLTRAN, but general enough to be used by almost any Host system.  
200102.THD 4714 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    How to get two lappers to talk to one another. Question about getting 102 and 200 to communicate via RS-232  
2400BD.THD 3651 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Discusses why M/L communication programs are important for 1200/2400 baud modems.  
ABROAD.HLP 8367 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Hopefully this file will give some insight into the problems of using your Model 100 abroad.  
ADRSBA.100 1295 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Creates and appends the ADRS.DO file for use with TWRIT and other programs which require formated ADRS file.  
AMIGA.TXT 3138 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Describes a method for sharing ASCII (.do) and BASIC (.ba) files between the M100 and the Amiga computer. Assumes Amiga Online! terminal.  
APP100.DO 1662 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
     
APP100.TXT 1426 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    APP100.TXT is the way I made the TRS-100 work as a portable keyboard for the Apple //e (or ][) using the CCS-7710 parallel interface card. If you prefer, it's how I make the Apple disk drives work for the 100. No null modem or special cables required. It don't work so good at 300 baud, but the bugs can't keep up at 1200 baud!  
ARCODE.DO 2323 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    .DO FILE TO BE PASTED TO ADRS.DO FILE TO LOCATE STATE NAME WHERE AREA CODE ORIGINATES. GOOD FOR THOSE LISTS OF NATIONAL BBS WHERE YOU KNOW THE AREA CODE AND NUMBER BUT DONT KNOW WHERE IN AMERICA THE BBS IS LOCATED.  
ATARI.XFR 4153 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This file describes one persons experience in using the Atari disk drives as a means of storing files from the Radio Shack model 100 portable computer. Direct modem transfers at 300 baud as well as nullmodem transfers at 1200 baud are discussed.  
ATEX.100 3966 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This program, written for Newsday, auto-dials and logs onto an ATEX computer system. It is expecting a message cued up, waiting to be sent. While this program is VERY specific to this application, there are useful routines sprinkled throughout. There are 3 levels of interrupts being managed, and I have tried to insure that EVERY GOSUB has a RETURN (Though I can't get the stack to overflow even when I unbalance GOSUBS). There is also a timeout routine.  
ATOHAZ.100 1994 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    A stripped down version of XMDM26.100. This program supports "attack dialing" a Hayes modem at 300/1200/2400 baud. It also supports using a file other than ADRS.DO. It also supports autolog. After autolog you will be in TELCOM's TERM mode. See XMDM26.DOC for info on commands. See ATOHAZ.DOC for specifics on this program.  
ATOHAZ.DOC 3417 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Documentation for ATOHAZ.100. Includes in strustions on required changes for use with some modems  
AUTANS.THD 3250 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Topic of autoanswer cables for the Model 100/102, includes references to publications with answers on how to build your own  
AUTLOG.BA 2480 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Describes how to use a ROM routine for autologing FROM BASIC. Will work with both the built-in modem and with external modems. Includes a disassembly of the ROM routine.  
AUTO.YGI 2039 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    A brief program that logs on and accesses YGI! while you're away. Its purpose is to maintain your points incase you can't get on for more than 30 days.  
AVATEX.THD 13044 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    file chonicles the attempts (and final success!) of one member in getting Avatex modem to work with Denny's "Hayes" series of programs  
AXCES.DOC 1694 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Documentation for AXCES.TTT  
AXCES.TTT 2171 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Code which provides for search of ADRS.DO file for phone numbers to access CompuServe. B-TCON.BIN [70310,355] 04-Dec-83 1910 APPLE BINARY PROGRAM CONVERTS BINARY TO TEXT FILES  
B-TCON.BIN 1908 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    APPLE BINARY PROGRAM CONVERTS BINARY TO TEXT FILES  
BBS.THD 2549 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Discusses use of the M100 as a BBS  
BBS100.ASC 11859 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This simple 9K BASIC Program, coupled with your 24K Mod 100, and an Auto-Answer Modem, will allow you to run your own Micro Bulletin Board System! It will accomodate 30 Users and allow up to 15 Messages on the System at any time. See BBS100.DOC  
BBS100.DOC 8665 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    documentation for BBS100.ASC  
BINARY.THD 15907 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Discusses downloading of binary files (CO & BA) to Model 100 family  
BREAK1.DO 760 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This file contains a one line patch to the "SXM" XMODEM transfer program to turn the F7 key into a true break. The sequence used is to set baud rate down to 75 baud, send a NUL, and set the baud rate back to whatever the TELCOM status command wants. This patch could also be applied to other programs with only minor changes.  
BREAK2.DO 1125 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This file describes how to install a switch for the Model 100 that will, when pressed, send a break signal via the internal or external modem. The small modificaion requires a single pole double throw momentary switch, three wires, and about half an hour (or less for experienced technicians).  
C64100.DO 5539 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    How to set up the Model 100 and a Commodore 64 side by side to "talk."  
CAT-03.ARC 43043 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This ARChive file for PC/MS-DOS contains all catalog (.CAT) files in THIS Library. Binary file; download with protocol and use ARC utiltiy to extract files.  
CBI.BA 3889 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    For business use only. Terminal program to access the CBI System and pull credit files. Accepts input in human form and then formats to the technical requirements of the CBI System. Train employees in 15 minutes or less.  
CBI.DOC 1496 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Documentation for CBI.BA  
CC100.TXT 1318 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This is a set of instuctions on how to transfer basic programs or text files from the Model 100 to the TRS-80 Color Computer. Hardware needed: Modem I, Color Scripsit(Rom Pack), ColorCom E (Elgin Systems)  
CISCHK.BA 945 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    CISCHK is a quick program to scan Basic programs (xxx.DO format) prior to uploading to CIS. It checks for overlength lines, or unusable characters and generates a file to RAM, LCD (default) or printer. Saves wear and tear on Sysop.  
CISFON.BA 3908 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Hate to carry your raggedy outdated, Compuserve access phone number list on the road? This program will create a .6k Basic program and a .4k ".DO" file that will allow you to look up an access number in most any area code, and append it (including your CIS log-on) to ADRS.DO.  
CITOH.100 1354 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Modification of Neil Wick's RLELPT.100 to dump graphics to C. Itoh Prowriter.  
CMS.100 1336 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Simple terminal package for uploading to XEDIT under the CMS/VM operating system.  
COCO.TXT 13446 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Here are extracts from a never published article on how to use the Radio Shack Color Computer as Mass Storage and personal Host for your Model 100.  
COCOTO.100 3528 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    COCOTO.100 details the way I communicate between Model 100 and TRS80 Color Computer, using COLORCOM/E as the terminal program for the Coco.  
CODECO.100 1478 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Allows you to send and recieve .DO files that contain graphics characters, even though your modem is set to 7 bit words. It converts graphic chars to others when it transmits the file, and reconverts them when it decodes a file.  
COM100.DOC 1540 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Documentation for COM100.RLC and COM100.SRC  
COM100.RLC 437 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Relocatable HEX file created by RLCLDR.BA that allows typing between two Model 100s WITH linefeeds and carriage returns.  
COM100.SRC 3317 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Source for COM100.RLC. Assembled with ROM2 from Polar  
COMCMD.HEX 2042 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    COM/CMD - Adapted for Model III/4 originally by Ronald F. Balonis, Model I version appeared in 80-micro Jan-84. Program provides a direct RS-232 communications link at 9600 baud between Model 100 RAM and Model III disk, both directions. (Also Model 4 in III mode.) Article presented assembly for Model I. Herein is assembled HEX for Model III/4 operating under TRSDOS 1.3  
COMLOG.100 3129 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    COMLOG.100 creates a tabular file, DATLOG- a date/day stamped log of use and costs for any online system/SIG. The program displays your entries and cumulated costs/minutes to the LCD for 1 or all databases between specified dates or 1 date. Allows user to install databases & hr/rates to get costs automatically. Includes features to deselect data entry, and to print hardcopy of DATLOG.  
COMLOG.DVI 5680 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    COMLOG.DVI Ver.1.4 creates a tabular file TIMLOG- a date/day stamped log of use, costs, and running totals for any online system/SIG. Verifies each entry & displays cost on the monitor with running total. Allows user to install databases & hourly rates to provide exact costs automatically. Other features: bypass data entry; print entries & total costs/minutes for 1 or all databases between 2 dates.  
COMQQQ.THD 13296 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    A newcomer asks common questions about using TELCOM and CIS while on the road -- from hotel rooms, office PBX systems, and the like -- and some of the "old pros" chime in with suggestions. There's some especially good information on using CompuServe's PERSonal file area for data storage.  
COMTIP.THD 782 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Troubleshooting TELCOM problems  
CONVER.HEX 560 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Converts ASCII HEX files to /CMD files on the Model III.  
CPMSND.100 532 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    model 100 program to send a .do file to cp/m systems. see sndrcv.doc. probably usable with other systems.  
CRLF.BAS 844 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This is an ASCII BASICA or GWBASIC "filter" program that may be required to correct problems with ASCII text files transferred from the M100 series portable. TELCOM apparently doesn't send LFs (only CRs) and some of the earlier DOS versions don't pass the CRs (of the CR/LF pairs) sent by the TEXT SAVE TO:COM... This program in the PC adds back in whichever ONE of the CR/LF pair may be missing. Input is from a FILESPEC - output is to FILESPEC.PRN  
CSC.THD 3028 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Describes the current status of the CSC/Infonet system, and gives some up-to-date access numbers  
CSCNET.THD 3716 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Discusses overseas communications with the CSC network  
CSSORT.BA 5406 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    CSSORT.BA is a companion program for sorting the files written to C-TIME.DO by the the program CSTIME.BA. THAT IS IT'S ONLY USE. CSSORT will sort the DO file and enter to the screen or printer a sorted and sub-totaled reading of where you spend your time on CSIS with a cost breakdown. See CSTIME.BA  
CSTIME.BA 3138 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    CSTIME.BA is a 1354 byte basic program which logs time spent in Compuserves services. This version works best for me. You may check the data files for Total calls for the week Total cost for the week Total cost of last call, Where your time is spent. Read CSTIME.INF  
CSTIME.INF 2627 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This file contains information on operation and enhancements for CSTIME.BA  
CTRLSQ.THD 13375 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    It has been noted that the Model 100 loses characters when on-line with certain public BBS's. Messages discusses this phenomenon and some reasons for it  
CW.100 1842 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Send morse code with your model 100. You can select the speed up to 60 WPM.  
CWKYBD.100 2906 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    A polished program to convert the Model 100 into a CW (Morse code) sending keyboard. Select speed to about 60 WPM; both direct and delayed transmission modes; brag tapes, etc. I have used it for hundreds of contacts and am happy with it.  
CWKYBD.DOC 1110 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Documentation for CWKYBD.100  
DEAF.100 4246 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    A modification of an RTTY program for use as a TDD (telecommunications device for the deaf). Adds auto transmit and receive and backspace/delete. Program can be made smaller by removing numerous REM's. External modem is required (1400 Hz Mark - 1800 Hz Space) for compatibility with other TDD's.  
DEAF.MDM 5574 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Info on modems and software for using Deaf TTY (TDD) links. Re-posted from USENET.  
DIAL.101 1071 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    A compact, easily modified persistant dialer based on XMODEM.312 and DIALER.100  
DIAL.BA 1129 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Small program that dials a number from the ADRS.do file and then makes an entry in the PHONE.do file of the time of the call and total minutes along with the record from ADRS.DO. See DIAL.DOC  
DIAL.DOC 1497 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Documentation for DIAL.BA  
DIALER.100 2192 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Program we have waited for by Gensch And Cassidy. Detect busy signal allows redialing no answer or busy. When carrier detected put you into Term mode in Telcom. Lots of potential applications.  
DIRACC.100 1693 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This is the Quebec's famous DIRECT ACCESS 100 program. It was written for one of our club's reunion. It permits the user to enter BASIC or TELCOM WITHOUT losing the phone line ! It is a MUST for all serious TELCOM users.  
DIRACC.DOC 1825 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Documentation for the DIRECT ACCESS 100 (DIRACC.100)  
DIRACC.INF 1910 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This document describes the program DIRACC.PW1, an enhancement of DIRACC.100 here in LIB1. This version provides a user friendly and (more-or-less) bomb proof "shell" for installing DIRACC. This utility provides access to Basic and Text while on-line.  
DIRACC.PW1 2233 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    DIRACC.PW1 is an enhancement of DIRACC.100 here in LIB1. This version provides a user friendly and (more-or-less) bomb proof "shell" for installing DIRACC. It will work cleanly with CDOS. This utility provides access to Basic and Text while on-line. See DIRACC.INF & DIRACC.DOC  
DIRACC.PW2 1754 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    DIRACC.PW2 is a byte-fought version of DIRACC.PW1. It always loads under HIMEM (vs. the optional load address in DIRACC.100 & DIRACC.PW1). This shorter version saves about 500 bytes, which may be significant if you want to keep it in the machine at all times.  
DIRACC.PW3 2249 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    DIRACC.PW3 is an enhancement of DIRACC.100 here in DL3. It provides a user-friendly means of installing and removing DIRACC, and will work cleanly with CDOS of the Chipmunk. This version (only!) is configured for use with Tony's MACPGM macro system; contact him on Easyplex for more information.  
DIRACC.THD 6439 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Hints on using DIRACC, installation and removal, and use with a commercial VT-100 terminal emulation program  
DIRACC.TIP 1429 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This tip file gives an approach to running DIRACC which tests to make sure it is installed and that the F6 key definition for Basic is what DIRACC expects.  
DIRCON.THD 2294 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    How to adapt to phone system where no modular jack is available  
DIRMDM.PC 2702 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Does your desktop computer have an internal modem but no RS-232 board? Mine does, and they told me it was impossible to connect it directly to my Model 100. It is possible! And here's how. This file tells how to link the modem of your Model 100 with that of an MS-DOS computer like a Tandy 1000, but may be useful with other systems as well.  
DISK.100 3971 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    Transfer program m100/disk of cp/m desktop using the cp/m utility 'pip' see DISK.DOC  
DISK.DOC 5554 1/28/2020 1:14:10 PM 1/28/2020 1:14:11 PM  
    Documentation for DISK.100  
DLTIME.INF 3338 1/28/2020 1:14:10 PM 1/28/2020 1:14:10 PM  
    This file includes comparative download timing data for several programs (SXM.100/CHP, XMODEM.312, TELCOM, TELCOM.CO and X-TEL. A final section discusses speed up of SXM.CHP for captures to disk.  
DNLOAD.TDD 7434 1/28/2020 1:14:10 PM 1/28/2020 1:14:11 PM  
    DESCRIBES A METHOD FOR DOWNLOADING TO THE TDD USING POWR-DOS AND XMODEM  
DNUNDR.THD 2096 1/28/2020 1:14:10 PM 1/28/2020 1:14:11 PM  
    One member's CIS experiences while traveling in Australia  
DOWDOC.100 2173 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This file explains certain features of the DOWLOG.100  
DOWLOG.100 6046 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    DOWLOG.100 is intended to show the communication and file handling capabilities of the Model 100. For further information, read DOWDOC.100  
DOWLOG.BA 827 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Short, simple program for logon to Dow Jones and collect selected stock quotes et alia. DATA lines at end of program specify stocks.  
DSKTRM.100 3408 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    DISK-TERM allows use of the Portable Disk Drive while online to a host computer. A Modem IS needed as well as POWER-DISK by Acroatix Inc. NOTE: The External Modem is NOT connected to the Mod-100 except by the Remote Plug of the Cassette Recorder Cable. Read DSKTRM.DOC  
DSKTRM.DOC 3068 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Documentation for DSKTRM.100 and hardware requirements with instructions for proper hook up.  
DWNLD.BAT 1111 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This is a "user-friendly" DOS .BATtch file for use in the IBM-compatible PC to effect ASCII text file transfers to the M100 series portables. D/L to the M100 and use UPLD.BAT to transfer it to the PC, or down-load UPDWN.ARC to the PC and unpack with ARCE.  
EM8000.DOC 1792 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8 Documentation - File 0  
EM8001.DOC 11725 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8 Documentation - File 1  
EM8002.DOC 12218 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8 Documentation - File 2  
EM8003.DOC 11739 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8 Documentation - File 3  
EM8004.DOC 9791 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8 Documentation - File 4  
EM8005.DOC 10181 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8 documentation - File 5  
EM8006.DOC 11126 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8 documentation - File 6  
EM8007.DOC 9155 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8 documentation - File 7  
EM8008.DOC 9458 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8 Documentation - File 8  
EM8410.100 13463 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8SIG Version 4.1. This version is an emergency fix in response to CI$ withdrawing the SNDMAL program. EM8SIG relied on the SNDMAL program to send email. This fix will now send email through the current MAIL facility but does not take advantage of any of its features. This fix may have broken certain features. Read the file EM8410.DOC. Checksum = 844,443  
EM8410.DOC 2007 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8SIG Version 4.1. This version is an emergency fix in response to CI$ withdrawing the SNDMAL program. This fix may have broken certain features. The program file is EM8410.100.  
EM8SIG.400 13611 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    EM8SIG Version 4.0. Adds Forum-only functions. EM8SIG.DC6 is the documentation addendum to EM8SIG.DCn (n=1-5). Also look for files with names EM8TIP.nnn (nnn > 000) for helpful hints.  
EM8SIG.EXE 49120 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    SELF-EXTRACTING ZIP'd FILE SUITABLE FOR DOWNLOADING TO PC's ONLY.  
ENTEL.100 712 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This short utility enhances Telcom's Terminal mode, permitting entry to Basic, easy transfer of ASCII files between RAM and a diskette, and quick return to TERM - without losing the phone line or your place in the CIS file. You can download and upload text of ANY length, regardless of the available RAM. Intended for the DVI, ENTEL.100 should work with any drive or cassette recorder accessible from Basic. Read ENTEL.DOC  
ENTEL.DOC 7059 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Instructions for ENTEL.100  
EURFON.TIP 7969 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    How to connect your laptop to European hotel phones to enhance communications and reduce costs.  
EXTRNL.MDM 7696 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    A small, simple program that will allow use of an external modem for higher- speed communiccations with the Model 100 family of computers, the 100, 102, and 200. It will "wake up" the external modem, set the proper communications parameters, send the phone number to dial to the modem, dial and wait for the modem connection, send your auto-logon string, then drop you into TELCOM's Terminal mode, ready to use. Checksum = 627,928  
FASTMD.100 1183 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Title : Use 100/102 modem at 450 baud FASTMDM.100 for the 100 or 102. Sppeds up TELCOM operation to 450 baud if your phone number supports it. (Sysop Note, 1/5/90: CompuServe no longer supports 450 baud)  
FILETR.MAC 1321 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    File describes two files in Library 13 which describe WPDUET, commercial software for file transfers between Model 100 family computers, or the WP-2 word processor, and MacIntosh computers.  
FILTRN.CAT 20475 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This file lists names and descriptions of programs and files in this section which deal with file transfers between computeres, file formatting, and general techniques.  
FLTIBM.ASM 21228 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This is version 1.7 of FLTIBM. This source file can be assembled with either MASM or ASM. It is set up for IBM and compatible PC's. However, only the UART set-up code is machine-peculiar.  
FLTIBM.CO1 1280 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This is the machine-language version of FLTIBM.ASM, configured for use of the serial port COM1, with a null modem adapter. This is a binary file for download to an IBM-PC or compatible. You must use an 8-bit protocol and error correction as given by XMODEM. This file CANNOT be downloaded into a Model 100.  
FLTIBM.CO2 1280 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This is the machine-language version of FLTIBM.ASM, configured for use of the serial port COM2, with a null modem adapter. This is a binary file for download to an IBM-PC or compatible. You must use an 8-bit protocol and error correction as given by XMODEM. This file CANNOT be downloaded into a Model 100.  
FLTIBM.DES 2034 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    FLTIBM is a machine-language program for the IBM-PC and compatibles which facilitates fast 9600 baud transfer of ASCII files between PC's and Model 100/102/200 computers (should work, but not documented, for others in the Kyocera family -- NEC 8201 and Olly M10. This file provides a summary description and identifies the files.  
FLTIBM.DOC 9167 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    FLTIBM is a machine-language program for the IBM-PC and compatibles which facilitates fast 9600 baud transfer of ASCII files between PC's and Model 100/102/200 computers (should work, but not documented, for others in the Kyocera family -- NEC 8201 and Olly M10. This file provides full documentation for FLTIBM.  
FLTIBM.HX1 2490 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This is FLTIBM.CO1 in hex format for 7-bit download. To use, go to IBMSIG and get MAKEHC.BAS. Run it using BASICA to get HC.COM. Download FLTIBM.HX1, rename as FLTIBM.HEX and do 'HC FLTIBM.HEX'. The result will be FLTIBM.COM. See FLTIBM.DOC  
FLTIBM.HX2 2490 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This is FLTIBM.CO2 in hex format for 7-bit download. To use, go to IBMSIG and get MAKEHC.BAS. Run it using BASICA to get HC.COM. Download FLTIBM.HX2, rename as FLTIBM.HEX and do 'HC FLTIBM.HEX'. The result will be FLTIBM.COM. See FLTIBM.DOC  
FLTIBM.NEC 736 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This is a short file describing how to use FLTIBM (see FLTIBM.DES/DOC) with the NEC 8201.  
FLTIBM.THD 7068 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Problems a Tandy 200 owner experienced with transfering files between Laptop and desktop computer  
FLTKP.100 7454 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This is the source code (8080) to a file transfer utility that runs on a KayPro computer, and will save and load text files at 19200 baud. Also will control Okidata 92 printer.  
FLTKP.COM 768 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Kaypro to/from 100/102/200 ascii file transfers. See FLTKP.INF  
FLTKP.INF 1257 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This file provides information on getting FLTKP into your Kaypro. In essence, FLTKP does for the Kaypro's (8 bit models) what FLTIBM does for IBM's and compatibles; so FLTIBM.DOC will be worthwhile reading.  
FLTKP.UPD 10252 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This is an update of Don Corbitt's FLTKP.100, a Kaypro program which enables Model 100 to/from Kaypro file transfer at 19200 baud -- in either TEXT or BASIC. This version is "cleaned-up" for assembly with the most common CP/M assembler, ASM.COM, and has a somewhat enhanced menu. Should be adaptable to most CP/M systems with little change. This is yet another contribution by the prolific Don Corbitt. If you have a Kaypro, you *need* this one!  
FLTRAN.100 2114 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    M/L program for Model III to allow file transfers between the model 100 and Model III at 19,200 baud. Must be converted to a /cmd file.  
FLTRAN.BIN 909 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    FLTRAN/CMD uploaded using VIDTEX executive. Instructions for use described in 19200.TXT in this data library.  
FLTRAN.HEX 1818 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Must be converted to FLTRAN/CMD on a Model III to run. Allows exchange of data and programs between Model 100 and Model III. Easy to use. On Model III side, follow directions after executing program. On Model 100 side: BASIC PGMS: SAVE"COM:98N1E" -- Model 100 to Model III LOAD"COM:98N1E" -- Model III to Model 100 TEXT FILES: Press F2 and SAVE TO: COM:98N1E -- Model 100 to Model III Press F3 and LOAD FROM: COM:98N1E -- Model III to Model 100  
FLTRAN.MAC 11803 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This is the source for fltran.hex. See that description for more info.  
FREEZE.THD 7384 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    discuss the probable cause(s) and cure(s) for an on-line "freeze" syndrome occasionally seen by users  
FRIEND.RLE 5835 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Use Graprt.200 to decode this portrait of handsome couple--Collegues of Dr. Preble. See GRAPRT.DOC  
FSTMDM.100 453 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    M100 specific program to speed up the internal modem to 450 baud for use with CIS.  
FSTMDM.DOC 2770 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Documentation and instructions for FSTMDM.100  
FT2000.100 2132 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    A procedure for transferring ASCII (Text) files from Model 100 to Tandy 2000 without special software.  
GERMAN.THD 11856 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Information on CIS access from Germany  
GRAPHR.100 1194 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Decoder for all CompuServe RLE graphics images. Use with MAPPER.100 to display radar & surface maps. Also may be used with TELCOM captured files. See GRAPHR.DOC  
GRAPHR.DOC 7353 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Documentation for GRAPHR.100 run-length decoder. Text of article in December 1983 issue of Portable Computer Magazine.  
GRAPHR.MOD 1320 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Modification of Alex Trevor's GRAPHR.100 to allow use on either the Model 100 or the Tandy 200. Use with MAPPER.MOD. When using on the Tandy 200, you can get almost entire USA on the screen! See Description of GRAPHR.100  
HAYES.DOC 10366 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Instructions for: QHAYES.100 V2.04, XHAYES.100 V2.05, QTOUCH.100 V2.02, XTOUCH.100 V2.02. X-TEL users MUST read this before trying the program designed for X-TEL!  
HELLO.100 4959 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Upload program for reporters. Also estimates typeset story length.  
HELLO.DOC 2300 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Documentation for HELLO.100, HELLO.200 and HELLO.LF  
HELLO.LF 700 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This short patch for HELLO.100 enables linefeed option for uploading. A bit crude, but it works.  
HELLO.M-A 420 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
HOWFAX.THD 2307 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Description of the simple steps for sending FAXes, via CISMAIL, from the M100/102/T200 laptops.  
HOWTO.RLE 1604 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    How to create Digitized Video pictures for display by GRAPRT.200  
IBMCON.THD 2360 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    File transfer tips, portables to PC's  
INSTAL.PCX 1408 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    See PCXFER.DES for description and PCXFER.DOC for ducumentation. Download EITHER PCXFER.LBR OR PCXFER.EXE, SETUP.XFR, and INSTALL.PCX. Important: the LBR and EXE files are stored as binary code. They must be downloaded using A B or XMODEM protocol. M-A1.BA [70310,355] 07-Dec-83 1175 SLIGHT MOD OF M-A.BA TO CURE STRING EATING PROBLEM! M-ADOC.DO [70310,355] 04-Dec-83 1745 USE OF HELLO.M-A M-A.BA AND B-TCONV.BIN AS APPLE II PROGRAMS FOR W/P FILE TRANSFER  
KRMTBA.100 9414 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Text, Bytes: 9414, Count: 186, 27-Apr-91 Title : Kermit protocol communications program for M100 Keywords: KERMIT COMMUNICATIONS TERMINAL M100 Kermit file transfer protocol for the model 100. Includes a communications/terminal package. No documentation available. Author and Copyright status unknown; appears to be public domain. Appears to support both modem and RS-232 port. Untested. Checksum = 569,061 [75715,1571]  
KTEL.100 496 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    WARNING! USE AT YOUR OWN RISK! THIS PROGRAM HAS BEEN TESTED AND APPEARS TO NOT AFFECT TELCOM OR ANY OTHER PROCESS, BUT I HAVE BEEN MADE A LIER BEFORE! USES A MACHINE CODE PGM TO GIVE: DATE DAY TIME, FILES, FREE MEMORY. AT THE PUSH OF THE F7 KEY WHILE IN TERM MODE. TO SEE THE RESULT, RUN THE PGM, THEN CALL 62918. PGM WILL WARN YOU WHEN YOU ARE ABOUT TO OVERWRITE IT'S SPACE.  
KWIK.LOG 4671 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Two "Rapid Logon Techniques" are described in this captured message thread.  
LAPMAC.THD 3706 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    More lore on file xfer to a Macintosh  
LAPTAP.EXE 35721 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    A 9600/19200 Baud file transfer utility for MS-DOS computers and Tandy class laptops. Use a null-modem connection. The pgm defaults to COM1 at 9600 Baud, but can be changed at the DOS command line: specify the port with a number and/or 'T' for 19200 Baud. Eg., LAPTAP 2T will put you on COM2 at 19200 bps. Wilson Van Alst [76576,2735]  
LOGCOM.JGB 3435 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    LOGCOM == LOG COMmunications usage. Short Basic program save ON/OFF date/times with optional comment. Semi-automatic operation: execute instead of TELCOM to record ON time, execute again immediately after leaving TELCOM. (The first execution starts TELCOM for you). Similar idea to TYMKPR, but smaller data file, longer program, and is not involked by IPL. Doc at end of LOGCOM.JGB. Packed version in LOGCOM.PAK  
LOGCOM.PAK 734 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    A packed version of LOGCOM.BAS  
LOGON.100 1906 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Will retrieve phone number and auto-logn sequence from ADRS.DO file. If no carrier detected, will redial after 20 second delay. If carrier is detected, will procede through auto-logon sequence and then jump to TELCOM's Term mode. Also, includes special position independent machine code routine for converting strings to uppercase. Instructions in comments at end of program.  
LOGON.TXT 1207 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    A library of ADRS.DO auto logons for the four major databases via Tymnet, Telenet, Uninet and direct numbers.  
LSETUP.100 821 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    A short BASIC program to select font and set margins on Epson and Star/Gemini printers for use with Telcom's ECHO function. Ideal for direct printing of large text files in the SIG database.  
M-A1.BA 1175 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    SLIGHT MOD OF M-A.BA TO CURE STRING EATING PROBLEM!  
M-ADOC.DO 1743 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    USE OF HELLO.M-A M-A.BA AND B-TCONV.BIN AS APPLE II PROGRAMS FOR W/P FILE TRANSFER  
M100.PKT 1757 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Two programs for the Model 100: PACKET.BA and TIMSET.BA. PACKET.BA is a short mailbox program for using the Model 100 with an amateur packet radio terminal node controller. TIMSET.BA is also for use with amateur packet radio. TIMSET.BA resets the TNC's clock to match the Model 100's clock.  
M100OS.BAS 7296 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    OS/2 EE 1.2 to Model 100 support interface. Allows you to send, receive, print files from a PC running OS/2 all in the background. Very simple, accurate and easy to use. Send files from the Model 100 to the PC's printer port. Written for OS/2 in REXX, Model 100 in basic.  
MAC100.THD 5300 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    comm connectivity of the Model 100 family with the Mac  
MAC100.TXT 5560 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This document describes how to interface a Macintosh and Model 100 to allow ASCII file transfer.  
MAC200.CBL 4968 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    This text file describes the cable connection between a Macintosh Plus and a Tandy Model 200. It is different from the Mac-M100 connection described in the file cable.mac. If you want to link your M200 to a Mac+ the document should prevent you going through the same rigmarole we put up with!  
MAC200.THD 6126 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    Discusses interfacing the Tandy 200 with Macintosh  
MACXFR.TIP 1619 1/28/2020 1:14:11 PM 1/28/2020 1:14:11 PM  
    How one user figured out how to transfer files from his Model 100 to a MacIntosh computer. He passes on the information for the benefit of others.  
MAPPER.100 2523 1/28/2020 1:14:11 PM 1/28/2020 1:14:12 PM  
    Auto log program to obtain and display weather radar charts from CompuServe. Requires GRAPHR.100 version 4 or greater to decode the run-length encoded graphics, and an entry in ADRS.DO of the form cis:4572105<=^CU70000,000^m?Ppassword^m> In unattended mode, logs on every 4 hours. Copyrighted by CompuServe 1988, but right to use granted to CIS subscribers.  
MAPPER.MOD 2712 1/28/2020 1:14:11 PM 1/28/2020 1:14:12 PM  
    Modification of Alex Trevor's Mapper.100 corrects bug in Surface Map upload and automatically senses whether you are using a Model 100 or the new Tandy 200 computers and adjusts the machine language calling adresses accordingly. Use this program with GRAPHR.MOD. See description of MAPPER.100  
MCIFMT.EJ 845 1/28/2020 1:14:11 PM 1/28/2020 1:14:12 PM  
    Program to remove the "Press RETURN..." prompts from downloaded MCI mail documents. Also removes end-of-line carriage returns (except between paragraphs), for easier reading, and formatting my your WP or print formatter.  
MIGENT.THD 8002 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Topic on Migent modem, and how to use it with the M100  
MIGNT2.THD 5656 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Use of the Migent modem with the Model 100  
MINET3.100 5049 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    MiniNet a BBS system for the Model 100  
MINET3.OPR 6329 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    MiniNet Sysop Documentation for a BBS system for the Model 100  
MINET3.USR 2359 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    MiniNet User Documentation a BBS system for the Model 100  
MINET4.100 4670 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    MiniNet 4 a cut down version of Mininet a BBS system for the Model 100  
MINIDO.100 8101 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Documentation for the new MININT.100, BBS system for the Model 100, version 2.1  
MININT.100 8420 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    See MINDOC.100. Updated and de-bugged bulletin board program for a Model 100 with 24k.  
MINMAC.100 628 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    A one-liner allowing the PASTE key to send a "macro" -- a customized command string -- to another computer in TELCOM. It also re-sets TELCOM status, for people whose DOS's like to scramble same. Model 100 specific. See MINMAC.DOC  
MINMAC.DOC 3615 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Documentation for MINMAC.100  
MISC.CAT 16477 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This file lists names and descriptions of programs and files in this section which deal with subjects other than file transfer and telecommunications. Including morse code and RLE graphics.  
MODEM.BA 3257 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Getting online with your M-100  
MORSE.100 2661 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    BASIC Program for the Model 100 which reads data lines from a file in RAM, CODE.DO, and translates it into morse code.  
MORSE.BA 1022 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Just type in a line of text, and this program will sound it out for you in morse code.  
MORSE.RK 992 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    A Morse Code Generator/Instructor, adapted from MORSE.BA. Type in the text and listen. Characters are displayed on the screen while sent. Additions include improved sound, choice of three sending speeds and repeat of previous message without retyping on pressing . The F8 key takes you back to main Menu.  
MORSE2.BA 9453 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This is a training program for learning Morse Code, as required by the FCC licensing exams for amateur radio operators. It's straight BASIC for the M100/M102, and requires about 9500 bytes to download, about 6300 as a .BA program. Featuring variable code speed, spacing, and audio pitch; and a file capture feature to assist practice verification. See MORSE.DOC  
MORSE2.DOC 4901 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Documentation for MORSE.BA  
MORSET.BA 1507 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    You WILL learn the alpha/numeric characters of the Morse code if you use this program. REPEAT allows you to hear & see each character again while you are learning to recognize its sound. LEARN by hearing & seeing random characters with emphasis on new ones in the ARRL order. REVIEW by getting a selected number of random characters. SEND messages also.  
OZEDIT.WD 2645 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    How to preserve hard carriage returns for Wordstar formatting and printing on an Osborne. To be used with OZZY.TRN  
OZZY.TRN 2738 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This is a simple description of a method to UPLOAD and DOWNLOAD files between the Model 100 and the Osborne computer.  
PACKET.THD 3966 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Application of the Model 100/102/200 for amateur packet radio  
PACKET.TRO 5056 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Textual introduction to the new Packet Radio rage: connect your micro up to a transceiver and communicate over the air!  
PBXCHG.100 1088 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Sets up your ADRS.DO file for dialing through a CENTREX system, hotel switchboard, or from non-switchboard phone. See PBXDOC.100  
PBXDOC.100 1186 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    PC-LF.BAS [71266,125] 12-May-87 569 PC-LF.BAS is a linefeed utiity for the IBM-PC and compatibles (anything running BASICA/GW-BASIC). If you somehow import files from M100/102/200 which have CR's without LF's, you can use this to add the LF's. Download into PC -- or download into M100/102/200 and transfer to PC (an ASCII file). PC-LF.EXE/binary [71266,125] 12-May-87 18560 Compiled version of PC-LF.BAS. Download to PC (only!) with XMODEM or CIS-B.  
PC-LF.BAS 569 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    PC-LF.BAS is a linefeed utiity for the IBM-PC and compatibles (anything running BASICA/GW-BASIC). If you somehow import files from M100/102/200 which have CR's without LF's, you can use this to add the LF's. Download into PC -- or download into M100/102/200 and transfer to PC (an ASCII file). PC-LF.EXE is the compiled version. Download to PC (only!) with XMODEM or CIS-B. <> Phil Wheeler -- 71266,125  
PC-LF.EXE 18560 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    PC-LF.BAS is a linefeed utiity for the IBM-PC and compatibles (anything running BASICA/GW-BASIC). If you somehow import files from M100/102/200 which have CR's without LF's, you can use this to add the LF's. Download into PC -- or download into M100/102/200 and transfer to PC (an ASCII file). PC-LF.EXE is the compiled version. Download to PC (only!) with XMODEM or CIS-B. <> Phil Wheeler -- 71266,125  
PCHXMD.DOC 4079 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Instructions for PCHXMD.CO -- an adaptation of the SIG's only m/l XMODEM program, XMD100. You'll want this if you're running 1200 or 2400 baud and don't feel like paying for commercial software.  
PCHXMD.DRV 284 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    BASIC driver program required for PCHXMD.HEX. See PCHXMD.DOC  
PCHXMD.HEX 6001 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    XMD100, plus screen scroll on/off feature. Permits high-speed downloads on M100 in capture mode, in addition to m/l speed XMDM transfers. LOTS faster than XMDM programs in BASIC, if you're using a high-speed modem. Has features of the DIRACC family, too. Requires CHANGE.BA (LIB7) to convert and PCHXMD.DRV in this LIB to run. See PCHXMD.DOC and XMD100.DOC  
PCXFER.DES 1286 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Information on a series of files that provide painless transfers between portables and IBM PCs and clones. Read this and PCXFER.DOC for full details on how to download.  
PCXFER.DOC 8630 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Full documentation (in about 8K) for PCXFER.LBR. Read and trap this if you're still curious (from PCXFER.DES).  
PCXFER.EXE 43136 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    See PCXFER.DES for description and PCXFER.DOC for ducumentation. Download EITHER PCXFER.LBR OR PCXFER.EXE, SETUP.XFR, and INSTALL.PCX. Important: the LBR and EXE files are stored as binary code. They must be downloaded using A B or XMODEM protocol.  
PCXFER.LBR 55168 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This is a binary, libraried file that contains everything needed for the PCXFER file transfer utility. Read PCXFER.DES before downloading. This file requires a protocol download and a library utility (LU or LUE) to extract the contents. The individual files are also available here, as described in PCXFER.DES and PCXFER.DOC  
PEGGY.RLE 5495 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Use Graprt.200 to decode this picture of BEAUTIFUL woman (my wife Peggy, the other Doctor in the family). See GRAPRT.DOC  
PHNTIP.001 6696 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This file is a summary of messages extracted from the message board on the subject of connecting to unknown phone systems while travelling.  
PHNTIP.002 1250 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    How to disable "Call Waiting" automatically, when you sign on to CIS. Available in some areas, check your local phone service for this feature.  
PHNTIP.004 2354 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Problems tapping into Multiline phones with 50-pin Amphenol connectors? Conversion explained to single-line RJ11 modular jacks and two-line-in-one-cord RJ14 modular jacks.  
PHNTIP.005 2195 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    What to do about problems using the direct connect cable with multiline phone systems that use "normal" phone jacks. Also a warning about using external modems on such systems.  
PHONE.FAX 1965 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Using the WriteROM/SuperROM PHNE function key, transmit formatted word-processor output directly to on-line services. Permits automatic transmission of FAXes using Compuserve's new service. Eliminates complexity of TELCOM and menus.  
PHONE.TIP 4563 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This file contains two tips. The first one describes a modification to the standard direct connect cable Radio Shack provides which adds flexibility to its use. The second tip is a list of things I carry in my "phone connection kit" (including a 4oz telephone) and where to get the stuff. I've made an effort to keep my kit as compact as possible.  
PICTUR.BAS 443 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    PICTUR.BAS - A program for processing FBI pictures and weather maps. See PICTUR.DOC  
PICTUR.DOC 6087 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Documentation for a program used to process FBI pictures or Weather Maps. It's mostly in M/L so it's very fast!  
PICTUR.LDR 859 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Loader for PICTUR.CO. See PICTUR.DOC  
PICTUR.PRO 879 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Application note to PICTUR.BA for C.ITOH PROWRITER printer.  
PIXTEL.ASM 11253 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    The assembly file for PIXTEL. Uploaded for information/modification only. It's not required to use PIXTEL.BA. See PIXTEL.DOC  
PIXTEL.BA 1528 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Now the M100 has a terminal program that displays radar maps, wanted posters, and CB pictures live, on-line. Download this program and run it to add graphics to TELCOM. See PIXTEL.DOC  
PIXTEL.DOC 3533 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Documentation for PIXTEL Q-DAC.100 [76701,40] 22-Jul-87 2062 Version of DIRACC.100 that adds screen scroll on/off. Operation is identical to DIRACC.PW3 except for the addition of F7 to toggle screen scroll on/off. Designed for use with Q-PORT.100 (as patched by Q-PORT.PCH) but can be used with any external modem and normal TELCOM. See DIRACC.DOC and DIRACC.INF Q-PORT.100 [76701,40] 07-Jan-88 5101 Auto-logon, Auto-dial program for the M100/T102 and the WorldPort Modem. Might work with other 100% Hayes compatible modems also. See W-PORT.DOC Q-PORT.PCH [76701,40] 22-Jul-87 497 Patch file for Q-PORT.100 V3.00 to allow use of Q-DAC.100 (DIRACC.100). Merge this file directly into a running version of Q-PORT and then resave updated program. Works exactly the same as Q-PORT.100 except F6 now accesses BASIC, F7 goes to TEXT and F7 toggles screen scroll.  
PROUD.RLE 6700 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Use GRAPRT.200 to decode this picture of Dr. Preble and one of his Laptop computers. See GRAPRT.DOC  
PWRTEL.100 849 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Very short program that replaces TELCOM with TELCOM.BA. Useful for Power Disk users who prefer not to use MENU.BA. Auto resets COM:STATS to M7I1E,20 pps and enables Function Key use of F6 and F7 as Bytes Free and displays RAM files while on-line.  
Q-DAC.100 2062 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Version of DIRACC.100 that adds screen scroll on/off. Operation is identical to DIRACC.PW3 except for the addition of F7 to toggle screen scroll on/off. Designed for use with Q-PORT.100 (as patched by Q-PORT.PCH) but can be used with any external modem and normal TELCOM. See DIRACC.DOC and DIRACC.INF for insructions.  
Q-PORT.100 5101 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Auto-logon, Auto-dial program for the M100/T102 and the WorldPort Modem. Might work with other 100% Hayes compatible modems also. See W-PORT.DOC for instructions. Denny Thomas  
Q-PORT.PCH 497 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Patch file for Q-PORT.100 V3.00 to allow use of Q-DAC.100 (DIRACC.100). Merge this file directly into a running version of Q-PORT and then resave updated program. Works exactly the same as Q-PORT.100 except F6 now accesses BASIC, F7 goes to TEXT and F7 toggles screen scroll.  
QHAYES.100 2906 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Auto-dial, auto-redial, auto-logon program for the M100 or T102. Can be used with any modem that is at least partially Hayes compatible. See HAYES.DOC for essential instructions.  
QTOUCH.100 2730 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Auto-logon, auto-dial software for the Touchbase Design TRAVELCOMM 1200 modem. Operates similarly to QHAYES.100, but see HAYES.DOC for details.  
RAM2PC.DOC 14763 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    A small BASIC program which transfers all .DO and .BA files in a RAM bank to a IBM type PC in one step. Also contains documentation on everything you need to know to transfer one or more files to and from a PC. A distillation of almost everything a user has learned about the subject.  
RAMDSK.TIP 2086 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    RAMDSK.TIP describes a very simple technique for keeping the M100 ON-LINE while transfering RAM to TDD. Requires only another modem (any kind that will put a carrier on line / nothing fancy) and a telephone "T" jack adapter. No other hardware mods!  
RCV100.HEX 3093 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    cp/m-80 program to receive .do files sent from 100 by cpmsnd.100. Your cp/m system must support redirection of console to rs232 with iobyte. see sndrcv.doc  
RECAP.TXT 1729 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    If you have frequently experienced "Download aborted" because of ram shortage, this might be the solution. Record all data exchanged over the phone line to a tape recorder and play it back!  
RECV.100 685 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This reads an ASCII file from the Model 100 rs232 port and writes the data to a DO file.  
RECV02.100 2309 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    RECV02.100 is designed to be used for the transfer of information to the M100 via the RS232 port, at any communications parameter necessary  
REDIAL.DOC 10197 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Documentation for Redial.JD1 & .JD2. Includes customization hints. NOTE to 5K callers: Although there are useful tips later in the file, the essentials are early.  
REDIAL.JD1 1613 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Redial.JD1 repeatedly calls a busy phone (presumably a BBS), and hollers when a modem answers. Redial.JD2 is a different, similar program. This version's smaller, but less automatic. Documentation at Redial.DOC  
REDIAL.JD2 1990 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Redial.JD2 repeatedly calls a busy phone (presumably a BBS), and logs you on when a modem answers. Redial.JD1 is a different, similar program. Documentation at Redial.DOC (You WON'T solve without!)  
REDIAL.MOD 3131 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    A short note, intended to start a discussion, on what would be required to modify Redial in order to make it recognize a voice response.  
REMOTE.ARC 14464 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Collection of small programs that allows you to run your IBM PC or compatible from your Model 100-200 keyboard. Download on your PC using a protocol and de-arc with ARCE from the IBMNET SIG.  
RFTBA.100 1623 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    The Remote File Transmitter program is useful when you need to send several files to someone, but you don't have time to send each one individually from TELCOM. The remote user can look at each file and download them at his leasure. All input is buffered. This means that you do not have to wait for the input prompt before you can begin typing. This also applies to the remote user; either one may "type-ahead" as many responces as necessary.  
RFTDOC.DO 7365 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Documentation and commented listing for RFTBA.100 S-TIME.BA [72300,3072] 18-Oct-87 1321 Used for logging time on CSIS, S-TIME.BA is a very short byte-save version of CSTIME.BA. Results from CSTIME and S-TIME can be merged for reading and both programs write to the same (C-TIME) file. S-TIME is best to use when on a trip when ram memory is precious. See CSTIME.BA, & CSSORT.BA  
RING.MON 1573 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This program monitors a phone line and records date, time, and the number of rings received. It demonstrates how to detect phone ring using a ring detect modem cable. For details on how to make the cable, see SCHEM.REV and TELECO.DO in LIB8.  
RLECGP.115 930 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This is a driver for the Radio Shack CGP-115 Printer/Plotter which allows it to reproduce a downloaded RLE coded graphics file. Developed on an Model 100, it uses no POKES, etc., so should also work on the Tandy 200.  
RLELPT.100 1624 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Prints any CompuServe RLE graphics file (Med. or Hi-Res) directly on any Radio Shack or Epson-compatible printer with dot-graphics. You can choose positive or negative display, and unlike screen dump methods, left and right edges of image are not cut off. 8-bit operation is *not* necessary for downloading RLE files.  
RLEQIK.100 3157 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Basic driver for RLEQIK.RLC  
RLEQIK.DOC 10628 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Instructions for RLEQIK  
RLEQIK.RLC 5455 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Compiled program for fast printing of CompuServe RLE format graphics files. See RLEQIK.DOC. Use RLCLDR from LIB8 to load machine language.  
RLETIP.002 2454 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    How to partially or fully correct RLE files which have missing delete characters (CHR$(127))  
RLETRS.100 1495 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This program takes an RLE graphics file and prints it on a Radio Shack Dot Matrix printer. Print pix and maps full paper width, so you get a BIG map or picture.  
ROMDMP.100 1870 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Model 100 program to send the contents of the 32K ROM in Intel (registered terade mahk) Hex format to the RECEIVE library function of the Model II/12/16.  
RS232.DOC 1505 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This is a DOC file describing a way to do hardware handshaking through the Model 100 RS232 port in order to interface with devices which do not support XON - XOFF flow control. INP(187) is tested from BASIC. Details for the Brother EP22 portable printer are given.  
RS232.RG1 2632 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This file contains information on the RS-232 pinout, and connections to connect the M100 to a Northstar Horizon II via the RS-232 port. It also contains a proposed M100 to M100 cable arrangement. It has been tested at 9600 baud between the N* and the M100, with the N* acting as a "modem", and as a "terminal". It may NOT work properly with other types of equipment.  
RS232.THD 6748 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Application of the M100 for controlling and monitoring the status of scanning radio SE-COM.THD 25-May-90 1645 file transfer betw. Mac SE and Tandy lappers  
RTTY.100 1735 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This is a BASIC program to allow the M100 to send and receive RTTY codes. REQUIRES an external TU (terminal unit). See RTTY.DOC  
RTTY.DOC 2512 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Document file for RTTY.100, a basic program to allow the M100 to emulate a RTTY terminal at 60 thru 100 WPM. REQUIRES an external TU (terminal unit). Of interest mainly to ham radio operators.  
RTTY.INF 1243 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    An approach to amateur RTTY with the Model 100  
RTTY3.100 1749 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Rewrite of the program RTTY.100 for receive only (SWL) use. Now has label line Selectable unshift on space, display of current speed, etc.  
RTTY3.DOC 1399 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Documentation for RTTY3.100, a program that allows reception of radio teletype messages using the Model 100 and a shortwave radio. Handles 60, 67, 75 and 100 WPM.  
S-TIME.BA 1321 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Used for logging time on CSIS S-TIME.BA is a very short version of CSTIME.BA It is only 430 bytes as a BA prog with rems removed compared to the 1500+ bytes of CSTIME. Results from CSTIME and S-TIME can be merged for reading and both programs write to the same (C-TIME) file. Checksum with DOC 93,148 Checksum Prog only 33,537 See CSTIME.BA, & CSSORT.BA in DL 3 by Bill Heiman 72300,3072  
SCROLL.DOC 1795 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Instructions for the use of SCROLL.XTL. X-TEL v2.1 Specific  
SCROLL.XTL 323 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Progam to disable scrolling while usinga 1200 baud modem. X-TEL v2.1 specific. See SCROLL.DOC  
SE-COM.THD 1645 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Advice on transferring files between the Mac SE and the M100/102/T200, including which off-the-shelf cable to use, a list of Mac software that's known to work, and relatively detailed procedures.  
SEND.100 829 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This transmits ASCII data from a Model 100 DO file to another computer via the RS232 port.  
SETUP.XFR 33 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    See PCXFER.DES for description and PCXFER.DOC for ducumentation. Download EITHER PCXFER.LBR OR PCXFER.EXE, SETUP.XFR, and INSTALL.PCX. Important: the LBR and EXE files are stored as binary code. They must be downloaded using A B or XMODEM protocol.  
SHOTEL.THD 2488 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    large-screen terminal display for laptop TELCO  
SLOLCD.THD 4588 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Why LCD scrolling slows TELCOM & how to disable scrolling  
SMADVI.DOC 14296 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Detailed instructions for using $$ saving SMART.DVI Ver.2.2 (rev.) - SMART.DVI avoids OM errors by using the R/S Disk/Video Interface (DVI) and has a time logging feature. These docs are lengthy (14+K) as they give full detail; you need to do only a few things to get it running. Use Echo (F5) to printer rather than downloading to memory.  
SMART.SIG 1140 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    SMART.SIG is an obsolete, scripted, automatic CompuServe access program, which has been replaced with EM8SIG, also in this library. SMART SCRIPT AUTOMATED DOWNLOAD FORUM USE INFO EM8SIG AUTO NAVIGATE CIS  
SND100.HEX 2477 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    program to send files from cp/m to model 100. your cp/m system must support redirection of console to rs232 with iobyte to use this program. see sndrcv.doc  
SNDRCV.DOC 2000 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    doc for cpmsnd, snd100 and rcv100  
SNDRCV.SUB 212 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    submit file to install snd100 annd rcv100 on your cp/m system. see sndrcv.doc  
SONY.100 5513 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This text file describes how I upload Video edit list from the Sony BVE-800 Video tape editor, for later use, into my Model 100.  
SQ100.COM 20572 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    SQUIRT : An IBM PC utility to transfer files to and from your Tandy 100-102. You need a null-modem cable. You do not need any software for the 100. Self-extracting archive.  
STAT.THD 6254 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    messages explaining some constraints in setting the Telcom STAT in the 100/102/200, and explaining in detail the meaning of the STAT parameters for the 200  
STATS.THD 7805 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    Information on the recommended TELCOM parameters, the "stat" setting, and an instructive discussion on data flow control and parity  
STRFIL.C64 2230 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    a description of how to store M100 files on your Commodore 64 disc drive using a modem without phone lines  
SWEEP.100 3629 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    This program displays page after page (8 lines per page) instead of scrolling. This allows telcom data to be displayed at high speed (upward of 2400 bps), thereby removing the need to lock the screen for fast up/downloads. Furthermore, a previous page can be viewed (not possible with screen locked). A 228-byte m/l program loadable anywhere at or above HIMEM. This file includes all necessary documentation as well.  
SXM.100 5132 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    A major revision of XMODEM.312; faster, shorter with many additional features including easier and faster printing, ability to upload messages to any BBS, and bytes free/files while downloading. Compatible with Floppy.CO and optimized for DVI use. Optional patch calls you upon successful redial of busy number. This version (3.2) downloads faster. Use a special version, SXM.CHP, to upload from or download to a Chipmunk.  
SXM.CHP 5302 1/28/2020 1:14:12 PM 1/28/2020 1:14:12 PM  
    A minor revision of SXM.100 to allow no-protocol downloads and uploads with the Chipmunk. All functions remain the same. See SXM.100 and SXM.DOC. Includes change to speed up XMODEM downloads.  
SXM.DOC 9581 1/28/2020 1:14:12 PM 1/28/2020 1:14:13 PM  
    This is the users guide and complete documentation for SXM.100, a faster and shorter telecommunications program with xmodem capability.  
SXMACC.DOC 8484 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documentation for SXMACC.RLC  
SXMACC.RLC 241 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    A small 100 byte M/L program for use with SXM.100 on this SIG. Allows access to TELCOM and then lets you return to SXM. Can be used with DIRACC to provide access to TEXT from SXM as well. Can be adapted to any BASIC program. Needs RLCLDR.100 to load. See SXMACC.DOC and SXMMRG.ACC  
SXMMRG.ACC 713 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    A small patch for SXM.100 or Chipmunk version to allow return to SXM from TELCOM using SXMACC.RLC. See SXMACC.DOC  
TEL101.ASM 11713 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    source code for TEL101.CO  
TEL101.INF 2124 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    brief instructions for use of TEL100.CO (built by TEL100.LDR)  
TEL101.LDR 5351 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    TEL101.LDR is a Basic program for the 100/102 (only!) which creates the M/L terminal program TEL101.CO. Just run it form the menu and wait. TEL101.CO works just like TELCOM in ROM, but adds SplitScreen, DIRACC and macros. Works with internal or external modem. See TEL101.INF for instructions and credits. This is a smaller alternative to XMDPW5, with all features except xmodem transfers.  
TELCOM.100 1189 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    I added a lot of REM's to this program that Don Corbitt submitted in a Message. Once the program is run, the F6 and F7 function keys in TERM mode in TELCOM are altered so that: F6 display Free Space left (RAM); F7 display directory (FILES)  
TELCOM.CAT 13388 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This file lists names and descriptions of programs and files in this section which deal with telecommunications, auto email, clock-oriented sign-on, and CIS weather/rader mapping, and BBS programs.  
TELCOM.THD 10612 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Discusses problem with PCSG Chipmunk program TELCOM.CO, and some alternate ways to download to the Chipmunk  
TELHZ1.100 2606 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    TELHZ1.100 is a Basic program which provides autodial and logon, and modem speed control, for TEL101.CO when used with a Hayes or compatible modem. Note customization notes in the first few lines, depending on how you use TEL101.CO (from menu or permanently loaded). Read HAYES.DOC  
TELKEY.100 528 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This two line BASIC program defines the F6 and F7 keys to have the following function. F6 prints free memory, F7 lists all file names (like BASIC FILES). Doesn't affect HIMEM.  
TELTIP.002 237 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Tip on downloading binary files in HEX format  
TELTIP.003 1427 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    There are special programs, DIRACC & X-TEL, which (among other things) will let you run BA programs with your Model 100 while on line. This edited message from Randy Hess tell how to do that WITHOUT any special software. It also goves some cautions re modifying the software you run while on line, to avoid returning to the M100 menu and breaking your connection.  
TELUTL.100 2117 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This program programs and in M100 TELCOM mode with either TELKEY or SCROLL (fast LCD) features. If `*' is next to TELKEY on the main menu, pressing in TERM mode gives you `Bytes Free' and gives you `Files' while on-line. If `*' is next to SCROLL on the main menu, turns SCROLL ON in TERM mode (limiting M100 speed to 600 bps) and turns SCROLL OFF for 1200 or 2400 bps operation.  
TELUTL.DOC 3394 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documents TELUTL.100 which is a TELCOM utility created to permit data and file use while on-line without interupting comm-link. Combines some of the most useful programs from this SIG.  
TERM.100 2350 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Terminal emulation and ASCII Xon/Xoff protocol to upload & download text files at 300 or 1200 baud. Does not auto-dial and does not wrap on upload. Buffered file I/O technique enables cassette file transfers.  
TERM.MR1 2909 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Preliminary program to work directly with the Chipmunk from a terminal status in the M100. Adapation of TERM.100 written by Rick Perry. May have some bugs since only tested the download capability and autolog.  
TERMCP.100 420 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    update to my earlier termcap file. It includes several functions, arrow and function keys (use ESC , etc), and works with vi, etc.  
TERMNL.CAT 26606 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This file lists names and descriptions of programs and files in this section which are "termial program" type. Including Xmodem protocol, VT100 terminal emulator, and auto redialer programs.  
THD-03.CAT 4343 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This file lists names and descriptions of the thread (.THD) files in THIS Library.  
TLCALL.HDC 2219 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    A TELECOMMUNICATION PROGRAM FOR THE TRS-80 MODEL 100 THAT ALLOWS REMOVAL OF UNWANTED CHARACTERS (SUCH AS RUBOUTS) FROM THE INCOMING STREAM  
TOGGLE.100 866 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Toggle scroll on/off with TELCOM's F6  
TONE.THD 3005 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    "Has anyone done a program that converts phone numbers to their tone equivalents and then sends them "down the line" after "picking up the phone" etc.?"  
TORLE.100 947 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This short program permits translation of screen graphics into RLE mode to send more easily to other computers. It works but it is slow and it would be a good idea if someone could translate it into a M/L program.  
TOWANG.BA 1462 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    An auto-dial text transfer program for sending 100 files to a Wang word processor. It fixes the Wang's quirk of eating characters after a CR/LF. May or may not work with other hardware that demonstrates the same byte-eating problem.  
TRANSF.ARC 30007 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Transfers files to and from an IBM and Mod100 or compatible at 9600 Baud. Also formats files during transfer so that they can be directly read by WordPerfect, WordStar, standard Ascii, or unformatted.  
TRANSF.IBM 5086 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    A description of three cheap and relatively simple methods of transferring text files between the IBM PC (and clones) and the Model 100 (or 200).  
TRANSF.TXT 1552 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Transfering files between the 100/102/200 and other computers can be FAST and painless! For my 77 year old mother I put together this little 1.5k explanation for her to use with her and my brother's Tandy 102s. If she can do it, anyone can.  
TRMCAP.100 1087 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    A pair of termcap entries. One for the "stock" model 100, and another for a 100 with a DVI. Unix users rejoice! now you can use the DVI with your 100  
TRMCAP.DOC 144 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This is a UNIX termcap, (TERMinal CAPability) file. It describes to a Unix system the codes and screen functions used by a mod100 so that the system can recognize and use your mod100 as a terminal. It has been tested on SPERRY/NCR systems and Fortune equipment.  
TRMDOC.MR1 1467 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documentation for TERM.MR1  
TTONE.100 4203 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This file is a captured series of messages regarding touch-tone dialing and the model 100 which may be of interest to those who need a method of accessing CIS through other phone carriers, or who might need to be able to access a service from non-dialing phones.  
TTY.100 2422 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Basic program which allows the transmission of teletype (Baudot code) at 60 WPM with your Model 100. Specially for hams.  
TXTTR.A-M 769 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
UNIXV.100 505 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    A terminfo description to use the Model 100 as a UNIX V terminal. See UNIXV.DOC  
UNIXV.DOC 2955 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documentation for UNIXV.100  
UPDWN.ARC 6016 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This is the .ARC file containing the UPLD.BAT, DWNLD.BAT, CRLF.BAS and UPDWN.DOC files. The DOS .BATch files are "user-friendly" programs for effecting ASCII text file transfers between IBM-compatibles and the Radio Shack/ TANDY 100 series portables. Down-load to the PC using a binary protocol and unpack using ARCE.  
UPDWN.DOC 6014 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This is the documentaion file for the UPLD.BAT, CRLF.BAS, DWNLD.BAT file for ASCII TEXT file transfers to/from IBM-compatible PCs. READ or Download All four files to the M100. None of them run on the M100, but instructions are included for transfer to the IBM. See UPDWN.ARC to get all four at once down- loaded to the IBM PC. Up-dated 11-26-87 & 12-18 for 7-bits & fixes for DOS bugs in version prior to PC DOS 3.1.  
UPL100.ASM 13072 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Source file for UPL100/CMD, a program to allow XON/XOFF file uploads to the TRS-80 Model I/III family. EDTASM source  
UPL100.BIN 4657 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Binary /CMD file for UPL100. Use Vidtex to download, and rename to UPL100/CMD. Allows uploading of files from the Model 100 to the TRS-80 Model I or III.  
UPL100.DOC 4293 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documentation for UPL100 -- a program that permits uploading files from the Model 100 to the TRS-80 Model I or III.  
UPLD.BAT 1244 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This is a "user-friendly" DOS batch file for use in the IBM-compatible PC for ASCII text file transfers from the M100 series to the PC. Self- documenting or read UPDWN.DOC (especially if you have problems). D/L to the M100 and manually enter it's MODE... & COPY COM... commands to transfer it to the PC.  
UPLMSG.ASM 3960 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Assembly source code for UPLMSG.CO. See UPLMSG.LDR  
UPLMSG.DOC 2691 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Brief description of how to use UPLMSG.CO to upload a message to a BBS, plus a couple of patches you can make without re-assembling.  
UPLMSG.LDR 2542 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Relocatable loader for 395 bytes of M/L that patches to TELCOM F7 for uploading messages to BBS's. Waits for prompt after each line; adds CR's only if wanted; can wait for echo if wanted; accomodates wordwrap. Assembly source code in UPLMSG.ASM VID2C [70725,1422] 17-Jan-85 3005 Model 100 to CoCo using Vidtex 4.0. (note: does not reflect 4.0B)  
VAXXFR.THD 2688 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Messages discuss M100 to VAX transfers  
VID2C 3005 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Messages discuss M100 to VAX transfers  
VT.THD 5357 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Capabilities and shortcomings of VT100/VT-52 emulator, and some alternate approaches  
VT1.THD 3275 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Topic on VT-52 emulation  
VT100.100 3834 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Emulates a 24x80 screen using Dec VT100 line protocol. See VT100.DOC  
VT100.ANS 1132 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This is a patch to VT100.100 for ANSI Dec VT100 protocol. Merge this file into VT100.100. See VT100.DOC  
VT100.DOC 3410 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documentation for VT100.100  
VT100.DVI 1806 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This is an addendum to VT100.100 to support use of the Tandy DVI. A manual dial option has been added. This file must be MERGEd with the VT100.100 program. (WARNING: These lines of code are untested!)  
VT52.DOC 2794 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This file gives a list of VT52 control characters, escape sequences and other info. It list them along with M100 (with DVI) equivalents.  
VTEMUL.DO1 10450 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    First half of the documentation for VTEMUL.RLC.  
VTEMUL.DO2 11217 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Second half of the documentation for VTEMUL.RLC.  
VTEMUL.RLC 7413 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    A M/L program to emulate a VT100 terminal. It decodes screen commands, has complete VT editing, emulates the VT keypad, recognizes tabs and even simulates the line drawing character set. It scrolls sideways to show the full 80 column screen. Compatible with TELCOM. Uses internal modem or RS232 port. You need RLCLDR.BA in LIB7 to locate this file anywhere in memory as a 3370 byte M/L program. W-PORT.DOC [76701,40] 07-Jan-88 11949 Documentation for Q-PORT.100 and X-PORT.100 X-BP.PCH [76701,40] 25-Jul-88 383 Patch to X-PORT.100 for use with the Traveling Software Booster Pack. Makes changes that are necessary to run the BP version of X-Tel. Load X-PORT into BASIC and at the OK prompt, type MERGE"X-BP then save the changed file to the BP. This change is compatible with the internal version of the WorldPort modem. X-PORT.100 [76701,40] 07-Jan-88 5789 Auto-dial, auto-redial, auto-logon program for the M100 and T102. Especially tailored to run with X-TEL V2.1 and V2.2. Can be used with any 100% Hayes compatible modem, but designed for the WorldPort. See Q-PORT.100 for standard version of this program. See W-PORT.DOC for very important instructions and warnings. XH-BP.100 [76701,40] 04-Oct-87 3512 XH-BP.100 is a version of XHAYES which has been modified to work with X-TEL in BOOSTER PAK. Looks for all BA, CO and DO files in the RAMDISK (R:). Tested with an early version of BoosterPAK. Let me know if it works with yours. See HAYES.DOC  
VTEMUL.THD 6111 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Technical aspects of adapting VTEMUL.RLC to the DVI X-TEL.THD 19-May-87 5200 Discusses one of the things X-TEL does not do, and work-around ideas  
W-PORT.DOC 11949 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documentation for Q-PORT.100 and X-PORT.100. Denny Thomas  
X-BP.PCH 383 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Patch to X-PORT.100 for use with the Traveling Software Booster Pack. Makes changes that are necessary to run the BP version of X-Tel. Load X-PORT into BASIC and at the OK prompt, type MERGE"X-BP then save the changed file to the BP. This change is compatible with the internal version of the WorldPort modem.  
X-PORT.100 5789 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Auto-dial, auto-redial, auto-logon program for the M100 and T102. Especially tailored to run with X-TEL V2.1 and V2.2. Can be used with any 100% Hayes compatible modem, but designed for the WorldPort. See Q-PORT.100 for standard version of this program. See W-PORT.DOC for very important instructions and warnings. Denny Thomas  
X-TEL.THD 5200 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    X-TEL is a commercial program for the Model 100/102 (and 200) with some really neat capabilities. It supports XMODEM transfers at machine language speeds -- fast! And it does so for binary (CO & BA) files. Finally, the latest version provides capture of ASCII files (like Forum messages) directly to the Chipmunk. But there are some things it does not do. These messages discuss one of them -- and work-around ideas.  
XFER.100 4206 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    This file explains an easy way to send programs and text files from one Model 100 to another by modem directly from BASIC or TEXT. You don't need to convert BASIC programs to ASCII in order to transfer them. You may not even need a phone line or RS-232 cable!  
XH-BP.100 3512 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
XHAYES.100 3519 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Auto-dial, auto-redial, auto-logon program for the M100 and T102. Especially tailored to run with X-TEL V2.1 and V2.2. Can be used with any external modem that is at least partially Hayes compatible. See QHAYES.100 for standard version of this program. See HAYES.DOC for very important instructions and warnings.  
XMD105.DOC 1464 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    List of suggestions for use and improvements of the Xmodem machine language program for the model 100.  
XMD105.SRC 39557 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Source code for updated machine language Xmodem Telcom program. this is XMD100 source with a few corrections. Please note those who modify it are asked to: 1) make your version different in a noticable way:version #, prompts, etc. 2) continue to share (especially with me) including source 3) make some of the suggested improvements (from here and elsewhere)  
XMD51A.ASM 7834 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    XMD51A.ASM & XMD51B.ASM are the two parts of the ADSM source for XMDPW5.CO/100 (upload of 10/14/88)  
XMD51B.ASM 12170 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    XMD51A.ASM & XMD51B.ASM are the two parts of the ADSM source for XMDPW5.CO/100 (upload of 10/14/88).  
XMD61A.ASM 7862 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    the first part of the linked ADSM source for XMDPW6.CO for the Model 100, of 7/10/88. This is the same source as XMDPW6.ASM, but configured for linking.  
XMD61B.ASM 15442 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    the second part of the linked ADSM source for XMDPW6.CO for the Model 100, of 7/10/88  
XMDHZ5.100 2578 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Version of XMDHZ5.100 for the 10/14/88 version of XMDPW5.CO. Autodial/redial for XMDPW5.CO/100 and Hayes-compatible modems. Note the customization comments in first lines of program and modify as needed.  
XMDHZ6.100 2577 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    A BAsic autodialer/redialer for use with XMDPW6.CO and a Hayes compatible modem. See line 1-3 for customization notes. Run only with XMDPW6.CO present on menu or loaded in its running location and ADRS.DO on menu. DO NOT use with earlier versions of XMDPWn.CO, or disaster may befall you.  
XMDM26.100 6395 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Improved XMODEM program for the Model 100/102, based on Rick Perry's XMODEM.312. Supports manual and attack-dialing with either the internal modem or an external Hayes-type modem. 300/1200/2400 baud. You must download XMDM26.DOC and run the included program to make a working copy of this program!  
XMDM26.DOC 12747 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documentation for XMDM26.100  
XMDM26.XR0 4186 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Variable & line # cross-reference for XMDM.26. Includes descriptions of the purpose of many variables and subroutines.  
XMDM26.XR1 13765 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Structured printout (pretty-printed) of XMDM26. *HEAVILY* commented.  
XMDPW5.100 10326 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Relocating Basic loader that creates an Xmodem comm program. Includes DIRACC (SHIFT-F6 to BASIC, SHIFT-F7 to TEXT) and splitscreen in Conference (use /NOECHO command and SHIFT-F1 to toggle, with label line ON to start). Now includes integral macro capability. See XMDPW5.DOC  
XMDPW5.DOC 11514 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documentation for XMDPW5.100 & XMDPW5.200  
XMDPW5.HEX 8222 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    HEX version of the 10/14/88 version of XMDPW5.CO/100. Load with HXFER.100; will run to top of User RAM (58918 to 62959). Use Basic loader (XMDPW5.100) for relocatable CO program  
XMDPW6.100 11318 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    A relocating BA loader to create a XMDPW6.CO (will relocate below DVI OS or CDOS). Works just like XMDPW5 (see XMDPW5.DOC, Lib 3), but Xmodem supports 0: (DVI and Chipmunk, not TDD), R:, CAS:. Revised to prompt for RAM file overwrite and to include integral on-line checksum (SHIFT-F2). Define Basic key 6 as: Key 6, "Term"+chr$(24)+callxxxxx"+chr$(13) where xxxxx = TOP+27  
XMDPW6.ASM 23288 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    ADSM source for the Model 100/102 XMDPW6.100  
XMDPW6.INF 7021 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    XMDPW6.CO is a full-featured machine language communications program which provides xmodem upload from and download to external devices, inclouding the DVI, Chipmunk, Gold Card and the Booster Pak. XMDPW6.CO is essentially identical to XMDPW5.CO --except it supports upload and download of files from/ to external devices (CAS:, 0:, R:, etc.). Model 100/102 update of 7/15/88 includes prompt for overwrite of RAM files and integral checksum code.  
XMODEM.312 6603 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    A major revision of XMODEM.100 with added features: [F1]=PREVious screen display, optional Xon/Xoff buffered file transfer, and more. See XMODEM.DOC  
XMODEM.DOC 12939 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    User's guide and some program documentation for XMODEM.312. The changes and new features appearing in the XMODEM.312 program are described, and some file transfer time comparisons reported. Program notes include ROM calls, POKEs, and machine language subroutines with their assembly source coding.  
XMODEM.HLP 2653 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Instructions and reasons for use of XMODEM protocol for UPLoading and DOWnloading files to databases on CompuServe.  
XMODM3.DOC 3583 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documentation for XMODM3.MLL, revision of Rick Perry's XMODEM.312. Program supports Anchor Signalman Mark XII modem and Chipmunk disk drive, CDOS version 2.4.5. Documentation assumes you have read XMODEM.DOC and XMODEM.UPD in this library.  
XMODM3.MLL 6850 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Rick Perry's XMODEM.312 modified for use with Anchor Signalman Mark XII modem and Chipmunk disk drive. See XMODM3.DOC, XMODEM.DOC and XMODEM.UPD in this database for instructions and cautions.  
XMODSK.100 6500 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    'xmodsk' allows the use of rs232 (com:) during logon using the built in modem of the Model 100. It needs a tiny little change in the hardware of the Model 100. Reading xmodsk.doc is essential for using of xmodsk.100. This rev. fixes some bugs which occured after extensive testing of my first rev.  
XMODSK.DOC 4041 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Documentation for XMODSK.100  
XP-HLP.100 256 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
XP-HLP.DOC 3558 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
XPTERM.100 8529 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
XPTERM.DOC 17790 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
XTOUCH.100 3363 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Auto-logon, auto-dial software for the Touchbase Design TRAVELCOMM modem to run with X-TEL V2.1 or V2.2 Similar to XHAYES.100, but see HAYES.DOC for details and very important warnings. See QTOUCH.100 for non-X-TEL version.  
ZIPLCD.THD 10500 1/28/2020 1:14:13 PM 1/28/2020 1:14:13 PM  
    Messages discuss M/L code for LCD control  




The Original Laptop Computer . . . 1983

Copyright 1999-2021 by Gary J. Weber. All Rights Reserved.
All other copyrights and trademarks property of their respective owners.